Studies On Foam Flooding EOR Technique For Daqing Reservoirs After Polymer Flooding
Authors:
- 14 April 2012
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Most of the high permeability reservoirs in Daqing oil field have been conducted by water flooding and polymer flooding. The average oil recoverable recovery has reached to 53% after polymer flooding. Currently, the further development of such reservoirs has become a big challenge due to both serious heterogeneity reservoirs and highly dispersed residual oil. Foam flooding, as a candidate EOR technique integrating both properties of gas injection technique and chemical flooding, has been proposed. In this study, systematic laboratory experiments on foam flooding EOR technique for Daqing reservoirs after polymer flooding have been performed. Several operating parameters have important influences on the recovery efficiency. ➀ Both the foamability and stability are the key factors to ensure high performance of recovery. The foam formulas were optimized with good performance of foamability and stability. ➁Injecting mode is another important factor. Three main injection modes, including co-injection of gas and solution, alternative injection of gas and solution, and direct injection of foam were compared. The direct injection of foam is the most effective mode and the alternative injection of gas and solution is the poorest. ➂The gas liquid ratio can also affect the flooding efficiencies greatly. The optimized gas liquid ratio was proposed as 3:1–4:1 for direct injection mode at the reservoirs condition. EOR effect evaluation of foam flooding after polymer flooding has been conducted upon three-layer positive rhythm sandpack cores flooding tests. Results indicate that foam flooding can contribute 12–22% OOIP recovery even if the recovery after polymer flooding is nearly 55%. The obviously increasing of injection pressure during the foam flooding indicates that nitrogen foam flooding has excellent profile control ability. Foam flooding can block thief zones for highly heterogeneous reservoirs. It may become a promise EOR method for Daqing reservoirs after polymer flooding.Keywords
This publication has 8 references indexed in Scilit:
- Investigation of Polymer-Enhanced Foam Flooding With Low Gas/Liquid Ratio for Improving Heavy Oil Recovery2010
- Investigation of Cyclic Water Injection after Polymer Flood in Xing4-6 Field, Daqing2009
- Foam films stabilized with alpha olefin sulfonate (AOS)Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- A Pore-Network Study of the Mechanisms of Foam Generation2004
- Experimental Study of Gas Injection in Surfactant-Alternating-Gas Foam Process2003
- Estimation of Foam Mobility in Heterogeneous Porous Media2002
- Study of the Mechanism of Polymer Solution With Visco-Elastic Behavior Increasing Microscopic Oil Displacement Efficiency and the Forming of Steady "Oil Thread" Flow Channels2001
- Increased Oil Tolerance of Polymer-Enhanced Foams: Deep Chemistry or Just "Simple" Displacement Effects?2000