Investigation of Adhesive Joining Strategies for the Application of a Multi-Material Light Rail Vehicle
Open Access
- 18 November 2021
- Vol. 14 (22) , 6991
Abstract
To meet the high demand for lightweight energy-efficient and safe structures for transport applications, a current state-of-the-art light rail vehicle structure is under development that adopts a multi-material design strategy. This strategy creates the need for advanced multi-material joining technologies. The compatibility of the adhesive with a wide range of material types and the possibility of joining multi-material structures is also a key advantage to its success. In this paper, the feasibility of using either epoxy or polyurethane adhesive joining techniques applied to the multi-material vehicle structure is investigated. Importantly, consideration is given to the effect of variation in bond thickness for both families of structural adhesives. Multi-material adhesively bonded single lap joints with different adhesives of controlled bond thicknesses were manufactured and tested in order to experimentally assess the shear strength and stiffness. The torsional stiffness and natural frequency of the vehicle were modelled using a global two-dimensional finite element model (FEM) with different adhesive properties, and the obtained vehicle performances were further explained by the coupon-level experimental tests. The results showed that the vehicle using polyurethane adhesive with a target bond thickness of 1.0 mm allowed for optimal modal frequency and weight reduction.Keywords
This publication has 28 references indexed in Scilit:
- The Effect of Adhesive Thickness on the Mechanical Behavior of a Structural Polyurethane AdhesiveThe Journal of Adhesion, 2014
- Mechanical characterization of a high elongation and high toughness epoxy adhesiveInternational Journal of Adhesion and Adhesives, 2013
- Effect of adhesive thickness, adhesive type and scarf angle on the mechanical properties of scarf adhesive jointsInternational Journal of Solids and Structures, 2013
- Parametric study of adhesive joints with compositesInternational Journal of Adhesion and Adhesives, 2012
- Recent developments in adhesive technology: a reviewAssembly Automation, 2011
- A review of finite element analysis of adhesively bonded jointsInternational Journal of Adhesion and Adhesives, 2011
- Vibration Damping of Adhesively Bonded Joints2011
- Optimum adhesive thickness in structural adhesives joints using statistical techniques based on Weibull distributionInternational Journal of Adhesion and Adhesives, 2010
- Adhesively bonded joints in composite materials: An overviewProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2009
- Effect of Adhesive Type and Thickness on the Lap Shear StrengthThe Journal of Adhesion, 2006