Behavior of Isotropic R/C Bridge Decks on Steel Girders
Authors:
- 1 March 1990
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 116 (3) , 659-678
Abstract
An experimental and analytical investigation is conducted regarding the behavior of Ontario‐type reinforced concrete bridge decks. A full‐scale bridge deck (both cast‐in‐place and precast), detailed in accordance with the Texas State Department of Highways provisions for Ontario‐type decks, and having about 60% of the reinforcement required by the current AASHTO code, performs well under current AASHTO design load levels. Under service and overload conditions (about three times the current AASHTO design wheel load), the behavior of the deck slab is essentially linear. Membrane forces do not noticeably affect the performance of the bridge prior to deck cracking. After cracking, significant compressive membrane forces are present in the deck, and could significantly increase its flexural capacity. Detailed finite element models of the specimen are developed for both the cast‐in‐place and precast panel deck cases. Cracking of the deck is followed using sequential linear analyses with a smeared cracking model...Keywords
This publication has 5 references indexed in Scilit:
- The Conestogo River Bridge—design and testingCanadian Journal of Civil Engineering, 1977
- Research, application, and experience with precast prestressed bridge deck panelsPCI Journal, 1975
- Interacting pretensioned concrete form panels for bridge decksPCI Journal, 1975
- The lateral stiffness and strength required to ensure membrane action at the ultimate load of a reinforced concrete slab-and-beam floorMagazine of Concrete Research, 1965
- ULTIMATE STRENGTH OF RECTANGULAR CONCRETE SLABS UNDER SHORT-TERM UNIFORM LOADING WITH EDGES RESTRAINED AGAINST LATERAL MOVEMENT.Proceedings of the Institution of Civil Engineers, 1964