A Comparison Between Organic Rankine Cycle and Supercritical CO2 Bottoming Cycles for Energy Recovery From Industrial Gas Turbines Exhaust Gas
- 12 October 2021
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 143 (12)
Abstract
The huge amount of discharged heat from industrial gas turbines could be profitably recovered in bottoming cycles, producing electric power to help satisfying the industrial process energy demand. The present work aims at systematically evaluating thermodynamic performance of ORC and supercritical CO2 energy systems as bottomer cycles of different small/medium size industrial gas turbine models, with different power rating. The Thermoflex software, providing the GT PRO gas turbine library, has been used to model the machines performance. ORC and CO2 systems specifics have been chosen in line with industrial products, experience and technological limits. In the case of pure electric production, the results highlight that the ORC configuration shows the highest plant net electric efficiency. The average increment in the overall net electric efficiency is promising for both the configurations (7 and 11 percentage points, respectively if considering supercritical CO2 or ORC as bottoming solution). Concerning the cogenerative performance, the CO2 system exhibits at the same time higher electric efficiency and thermal efficiency, if compared to ORC system, being equal the installed topper gas turbine model. The ORC scarce performance is due to the high condensing pressure, imposed by the temperature required by the thermal user. CO2 configuration presents instead very good cogenerative performance with thermal efficiency comprehended between 35 % and 46 % and the PES value range between 10 % and 22 %. Finally, analyzing the relationship between capital cost and components size, it is estimated that the ORC configuration could introduce an economical saving with respect to the CO2 configuration.Keywords
This publication has 10 references indexed in Scilit:
- Improvement design and analysis of a supercritical CO2/transcritical CO2 combined cycle for offshore gas turbine waste heat recoveryEnergy, 2020
- Supercritical CO2 Brayton cycle: A state-of-the-art reviewEnergy, 2019
- Analysis of supercritical CO2 Brayton power cycles in nuclear and fusion energyFusion Engineering and Design, 2019
- Feasibility of ORC application in natural gas compressor stationsEnergy, 2019
- Comparison between ORC and CO2 power systems for the exploitation of low-medium temperature heat sourcesEnergy, 2018
- Thermodynamic and economic investigation of coal-fired power plant combined with various supercritical CO2 Brayton power cycleApplied Thermal Engineering, 2018
- Comparison of micro gas turbine heat recovery systems using ORC and trans-critical CO2 cycle focusing on off-design performanceEnergy Procedia, 2017
- Design consideration of supercritical CO2 power cycle integral experiment loopEnergy, 2015
- Binary ORC (Organic Rankine Cycles) power plants for the exploitation of medium–low temperature geothermal sources – Part B: Techno-economic optimizationEnergy, 2014
- ORC waste heat recovery in European energy intensive industries: Energy and GHG savingsEnergy Conversion and Management, 2013