Design of discrete-time repetitive control system for pole placement and application
Authors:
- Z. RiadhZRZ. Riadh
- Y. FunahashiYFY. Funahashi
- 1 June 1999
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 4 (2) , 110-118
Abstract
A new repetitive control system is proposed from the viewpoint of pole placement. First, the proposed repetitive controller can assign all poles of the closed-loop system on a disk with a given radius and the center at the origin. As a result, faster convergence of the controlled error to zero than the previous ones is obtained. Next, the proposed controller is obtained explicitly, and the design method does not require an equation to be solved. The design effort is independent of the period of the repetitive signals to be tracked or rejected. In other words, the design effort is very small, even if the period is very large. Then, the robustness of the control system is improved by introducing a low-pass finite-duration impulse-response filter in the controller. Finally, the proposed scheme is applied to a DC servomotor system, and the effectiveness is demonstrated by both simulations and experiments.Keywords
This publication has 13 references indexed in Scilit:
- Zero Phase Error Tracking System With Arbitrarily Specified Gain CharacteristicsJournal of Dynamic Systems, Measurement, and Control, 1997
- Rejection of unknown periodic load disturbances in continuous steel casting process using learning repetitive control approachIEEE Transactions on Control Systems Technology, 1996
- Optimal Feedforward Controller with Zero Phase Error Tracking ControllerTransactions of the Society of Instrument and Control Engineers, 1995
- Robust Adaptive and Repetitive Digital Tracking Control and Application to a Hydraulic Servo for Noncircular MachiningJournal of Dynamic Systems, Measurement, and Control, 1994
- Zero Phase Error Tracking Controllers With Optimal Gain CharacteristicsJournal of Dynamic Systems, Measurement, and Control, 1993
- Digital Repetitive Control for Linear Mechanical SystemsTransactions of the Society of Instrument and Control Engineers, 1990
- Analysis and Synthesis of Discrete-Time Repetitive ControllersJournal of Dynamic Systems, Measurement, and Control, 1989
- Repetitive control system: a new type servo system for periodic exogenous signalsIEEE Transactions on Automatic Control, 1988
- Zero Phase Error Tracking Algorithm for Digital ControlJournal of Dynamic Systems, Measurement, and Control, 1987
- The internal model principle for linear multivariable regulatorsApplied Mathematics & Optimization, 1975