All‐polyethylene compositions based on ultrahigh molecular weight polyethylene: Synthesis and properties
- 18 February 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (38)
Abstract
Reactor polymer compositions (RPC) of ultrahigh molecular weight polyethylene (UHMWPE) with Mw = 1,000 kg/mol and low molecular weight high density polyethylene (LMWPE) with Mw = 160 kg/mol were synthesized in a two‐stage ethylene polymerization with a rac‐Me2Si(Ind)2ZrCl2/methylaluminoxane catalyst. The conditions of the stages that ensure the formation of UHMWPE and LMWPE fractions with the desired molecular weight and properties were selected based on the study of one‐stage ethylene polymerization over this catalyst in a wide temperature range. The order of fraction synthesis in RPC preparation was changed. Two series of compositions UHMWPE/LMWPE and LMWPE/UHMWPE with UHMWPE content from 20 to 90 wt% were obtained. The SEM method was used to study the morphology of the nascent polymer particles. It was shown that RPC physical and mechanical properties depend not only on the UHMWPE content, but also on the morphology of the particles of reactor powders, which is determined by the order of polymer fraction synthesis. Materials of LMWPE/UHMWPE series have higher tensile properties compared to UHMWPE/LMWPE of the same composition. The LMWPE/UHMWPE compositions containing ≤50 wt% of UHMWPE flow even at a load of 10.5 kg.Keywords
Funding Information
- Russian Academy of Sciences (0082‐2014‐0014, 0082‐2014‐0009)
- Russian Foundation for Basic Research (18‐33‐00825)
This publication has 26 references indexed in Scilit:
- Structure and tensile properties change of LDPE/UHMWPE blends via solid state shear millingJournal of Applied Polymer Science, 2013
- Controlling Polyolefin Properties by In‐Reactor Blending: 2. Particle DesignMacromolecular Reaction Engineering, 2012
- Ethylene polymerization and ethylene-1-hexene copolymerization over immobilized metallocene catalystsKinetics and Catalysis, 2012
- Correlation among powder morphology, compactability, and mechanical properties of consolidated nascent UHMWPEJournal of Applied Polymer Science, 2010
- High‐density polyethylene/ultrahigh‐molecular‐weight polyethylene blend. I. The processing, thermal, and mechanical propertiesJournal of Applied Polymer Science, 2005
- Influence of the method of mixing on homogeneity and crystallization kinetics of blends of linear and branched polyethyleneJournal of Applied Polymer Science, 2004
- HDPE/LLDPE reactor blends with bimodal microstructures—part I: mechanical propertiesPolymer, 2002
- Small Angle Neutron Scattering Investigations of Melt Miscibility and Phase Segregation in Blends of Linear and Branched Polyethylenes as a Function of the Branch ContentMacromolecules, 1997
- Cocrystallization and Phase Segregation of Polyethylene Blends between the D and H Species.6.Time-Resolved FTIR Measurements for Studying the Crystallization Kinetics of the Blends under Isothermal ConditionsMacromolecules, 1994
- Phase segregation in blends of linear with branched polyethylene: the effect of varying the molecular weight of the linear polymerPolymer, 1992