Effects of Feed Solution pH on Polyelectrolyte Multilayer Nanofiltration Membranes
Authors:
Open Access
- 20 December 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 5 (1) , 355-369
Abstract
Over the past decade polyelectrolyte multilayer (PEM)-based membranes have gained a lot of interest in the field of nanofiltration (NF) as an alternative to conventional polyamide-based thin film composite membranes. With great variety in fabrication conditions, these membranes can achieve superior properties such as high chemical resistance and excellent filtration performance. Some of the most common polyelectrolytes used to prepare NF membranes are weak, meaning that their charge density depends on pH within the normal window of operation relevant for potential applications (pH 0-14). This might cause a dependency of membrane properties on the pH of filtered solutions, as indicated by other applications of PEMs. In this work, the susceptibility of membrane structure (swelling and surface charge) and performance (permeability, molecular weight cutoff, and salt retention) toward the pH of the filtration solution was studied for four fundamentally different PEM systems: poly(diallyldimethylammonium chloride) (PDADMAC)/poly(sodium-4-styrenesulfonate) (PSS) (strong/strong), poly(allylamine hydrochloric acid) (PAH)/poly(acrylic acid) (PAA) (weak/weak), and PAH/PSS (weak/strong) and PAH/PSS+PAH/PAA (asymmetric). Slight variations in structure and performance of the PDADMAC/PSS-based membranes were observed. On the contrary, structure and performance of PAH/PAA-based membranes are very susceptible to feed solution pH. A continuous change in charge density with variation in pH significantly affects salt retention. An increased swelling at pH 9 translates to variation in permeability and molecular weight cutoff of the membrane. The susceptibility of PAH/PSS-based membranes to pH is less pronounced compared to the PAH/PAA-based membranes since only one of the polyelectrolytes involved is weak. No structural changes were observed, indicating additional specific interactions between the polyelectrolytes other than electrostatic forces that stabilize film structure. A combination of the PAH/PSS and PAH/PAA system (8 + 2 bilayers) also displays a clear dependency of both membrane structure and performance on solution pH, where PAH/PSS is dominating due to a higher bilayer number.Keywords
Funding Information
- H2020 European Research Council (714744)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (731.016.404)
- NX Filtration
- Oasen (Gouda, The Netherlands)
This publication has 67 references indexed in Scilit:
- Stimuli-responsive LbL capsules and nanoshells for drug deliveryAdvanced Drug Delivery Reviews, 2011
- Proposing nanofiltration as acceptable barrier for organic contaminants in water reuseJournal of Membrane Science, 2010
- Linear and Exponential Growth Regimes of Multilayers of Weak Polyelectrolytes in Dependence on pHMacromolecules, 2010
- Influence of Solute−Membrane Affinity on Rejection of Uncharged Organic Solutes by Nanofiltration MembranesEnvironmental Science & Technology, 2009
- Recovery of phosphate using multilayer polyelectrolyte nanofiltration membranesJournal of Membrane Science, 2009
- The influence of pH, salt and temperature on nanofiltration performanceJournal of Membrane Science, 2008
- Acid−Base Equilibria of Weak Polyelectrolytes in Multilayer Thin FilmsLangmuir, 2003
- Self-assembled polyelectrolyte multilayer membranes with highly improved pervaporation separation of ethanol/water mixturesJournal of Membrane Science, 2001
- Controlling Bilayer Composition and Surface Wettability of Sequentially Adsorbed Multilayers of Weak PolyelectrolytesMacromolecules, 1998
- pH-responsive permeability of poly(acrylic acid)— poly(ethylenimine) complex capsule membraneJournal of Membrane Science, 1993