Statistical Stability Characterization of Schmitt Trigger Based 10-T SRAM Cell Design
Authors:
- 1 February 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1000-1005
Abstract
In this paper, stability analysis of conventional 6-T SRAM cell and Schmitt trigger (ST) based 10-T SRAM cell with optimized sizing parameters has been performed and compared. The read stability, write ability, delay and dissipated power have been investigated. By using N-curve methodology a significant improvement of 4.49%, 5.13% and 28.65% in SVNM, SINM and WTI respectively was observed for Schmitt trigger (ST) based 10-T SRAM cell as compared to optimized 6T SRAM cell. Furthermore, the effects of supply voltage and temperature on conventional 6T SRAM stability in read and write operational mode have also been examined. Furthermore, both read delay and read current were investigated for ST based 10-T SRAM cell and found in desirable limits. It is also interesting to note that read delay is improved by 66%. Monte-Carlo simulation of the ST based 10-T SRAM cell circuit is carried out in order to find the deviation for power and the read current. The read current of the 10T topology is found to be 29.97μA with standard deviation of 4.55μA. Mean dynamic power for all process corners is also calculated by monte-carlo simulation of 4000 point each and deviation from the mean power was obtained. For simulation process 90nm technology node at 1V power supply was used on cadence virtuoso tool.Keywords
This publication has 24 references indexed in Scilit:
- A Novel 8T SRAM Cell with Improved Read and Write Margins2015
- Statistical analysis of low-power SRAM cell structureAnalog Integrated Circuits and Signal Processing, 2014
- A new asymmetric 6T SRAM cell with a write assist technique in 65 nm CMOS technologyMicroelectronics Journal, 2014
- 40 nm Bit-Interleaving 12T Subthreshold SRAM With Data-Aware Write-AssistIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- Single-ended, robust 8T SRAM cell for low-voltage operationMicroelectronics Journal, 2013
- Differential-read 8T SRAM cell with tunable access and pull-down transistorsElectronics Letters, 2012
- Minimizing power consumption in digital CMOS circuitsProceedings of the IEEE, 1995
- Low-power CMOS digital designIEEE Journal of Solid-State Circuits, 1992
- Static-noise margin analysis of MOS SRAM cellsIEEE Journal of Solid-State Circuits, 1987
- Threshold voltage models of short, narrow and small geometry MOSFET's: A reviewSolid-State Electronics, 1982