Surface Integrity Enhancement of Stainless Steel and Copper Alloy Golf Putter Faces via Ultrasonic Nanocrystal Surface Modification: Performance Improvement and Restoration and Their Implications for the Circular Economy
Open Access
Abstract
This study explores the application of ultrasonic nanocrystal surface modification (UNSM) technology to both new and aged golf putters to improve shot performance. Unlike drivers and irons, putters are used for short-distance shots, making directional precision a critical factor for putting performance. The scientific contribution of this work lies in isolating the micro-tribological mechanisms of nanostructured surfaces under low-energy impact via a robot-assisted testing framework, while the industrial contribution establishes a room-temperature surface remanufacturing paradigm for extending the lifecycle of sports equipment. Here we demonstrate that improving the surface integrity of the putter face using UNSM enhances putting straightness and distance consistency. Empirical testing using a semi-automated swing robot was conducted to evaluate both directional precision and successful hole-ins (based on a standard 108 mm hole cup). For new AISI 304 putters, UNSM treatment reduced the standard deviation (SD) of lateral displacement by 78.7% (from 49.97 to 10.64 mm), and directly boosted the hole-in success rate from 66.7% (20/30 successful trials) to 96.7% (29/30 trials). For the aged copper (Cu) alloy putter, UNSM successfully restored mechanical performance, yielding a 45.04% improvement in shot consistency (standard deviation decreased from 10.79 to 5.93 mm), reducing lateral deviation offset from −7.72 to −5.84 mm, and elevating the hole-in success rate from 84% (21/25 trials) to 96% (24/25 trials). Surface characterization analysis revealed that UNSM reduced surface roughness average (Ra) by 76.04% for AISI 304 and 67.98% for Cu alloy, while increasing surface hardness from 332 to 353 HV (AISI 304) and from 610 to 755 HV (Cu alloy). Life cycle assessment indicates that extending the service life of premium Cu alloy putter via room-temperature UNSM prevents primary metal production and forging, mitigating 1.5 to 6.5 tons of CO2 emissions per ton of remanufactured steel and heavy alloy components, thereby directly contributing to UN sustainable development goals (SDGs 12 and 13) and the circular economy.Keywords
This publication has 16 references indexed in Scilit:
- Electromagnetic assisted Ultrasonic Nanocrystal Surface Modification of SS304Procedia CIRP, 2026
- Achieving anisotropic wear resistance by directional nanocrystallization of crystalline metalComposite Design and Manufacturing, 2025
- Surface topography as a material parameterMRS Bulletin, 2022
- Microstructural evolution and mechanical properties of Cu-based alloy by post-sintering ultrasonic nanocrystal surface modificationMaterials Letters, 2022
- Correlation of orientation relationships and strain-induced martensitic transformation sequences in a gradient austenitic stainless steelJournal of Materials Science, 2020
- Literature review on the mechanical properties of materials after surface mechanical attrition treatment (SMAT)Nano Materials Science, 2020
- Effects of Ultrasonic Nanocrystal Surface Modification on the Residual Stress, Microstructure, and Corrosion Resistance of 304 Stainless Steel WeldsMetallurgical and Materials Transactions A, 2018
- A critical assessment of surface texturing for friction and wear improvementWear, 2017
- Differences between experts and novices in kinematics and accuracy of golf puttingHuman Movement Science, 2010
- The physics of golfReports on Progress in Physics, 2002