Mechanical properties and impact toughness of talc‐filled β‐crystalline phase polypropylene composites
Authors:
- 1 March 1997
- journal article
- research article
- Published by Wiley in Journal of Vinyl and Additive Technology
- Vol. 3 (1) , 89-95
Abstract
Injection molded β‐crystalline phase polypropylene (PP) composites containing 5, 10, 20, 30 and 40% (by weight) of talc filler were studied by X‐ray diffraction, scanning electron microscopy, static tensile and falling drop weight impact tests. The X‐ray diffraction analysis showed that the talc filler suppresses the formation of β‐form PP dramatically. As a result, the β‐PP composites containing talc content ≥20 wt% consisted mainly of the α‐form PP phase. The tensile test showed that the addition of talc filler up to 40 wt% leads to an increase in Young's modulus whereas little effect is observed on the yield strength of composites with the addition of talc up to 30%. This behavior can be attributed to the load bearing effect of talc particles with a platelike structure and to good interfacial bonding exists between the matrix and filler. The impact tests revealed that the critical stain energy release rate (G c ) of the β‐PP polymers appears to increase initially with the addition of 5 wt% talc; thereafter it decreases significantly with increasing talc content.Keywords
This publication has 23 references indexed in Scilit:
- Crystallization behavior of polypropylene filled with surface-modified talcJournal of Applied Polymer Science, 1996
- The Effect of Filler Content and Size on the Mechanical Properties of Polypropylene/Oil Palm Wood Flour CompositesPolymer International, 1996
- Structure and gas permeability of microporous films prepared by biaxial drawing of β-form polypropylenePolymer, 1996
- Microporous Film, Made from β-Crystalline Phase PolypropyleneInternational Polymer Processing, 1995
- Effect of β-nucleator content on the crystallization and melting behaviour of β-crystalline phase polypropyleneThermochimica Acta, 1992
- Nucleation and crystallization of polypropylene by mineral fillers: relationship to impact strengthPolymer, 1992
- Supermolecular structure of isotactic polypropyleneJournal of Materials Science, 1992
- The β‐crystalline form of wollastonite‐filled polypropyleneJournal of Applied Polymer Science, 1990
- Studies on the β‐crystalline form of isotactic polypropyleneJournal of Polymer Science Part B: Polymer Physics, 1986
- The spherulitic and lamellar morphology of melt-crystallized isotactic polypropylenePolymer, 1985