Probabilistic model for cracking localization in reinforced fibrous concrete beams
Open Access
- 14 February 2024
- journal article
- research article
- Published by Springer Nature in Journal of Engineering Mathematics
- Vol. 144 (1) , 1-20
Abstract
This paper proposes a probabilistic model that explains the phenomenon of cracking localization (CL) in RC beams with addition of steel fibers. Quantification of the CL is defined as the ratio between the total number of cracks and the number of significantly wide cracks. The model considers both the fibers and conventional reinforcement ratios, as well as the steel stress hardening and the location of the rebars in the cross-section. The fiber distribution in the concrete mix is considered random while the conventional reinforcement—as deterministic. A cumulative function of the total steel distribution, and a binomial probability function are proposed for a newly defined variable that represents the distribution of the fibers effectiveness along the beam. The model was validated with available data from flexural experiments showing good agreement of the model’s prediction with the reported results. The model shows that the cracking localization level in beams is more pronounced in beams with low reinforcement ratios and relatively large fibers content and enables its quantification.Keywords
Funding Information
- Technion - Israel Institute of Technology
This publication has 26 references indexed in Scilit:
- Flexural behaviour of steel fibre-reinforced concrete under cyclic loadingConstruction and Building Materials, 2016
- Cracking localization and reduced ductility in fiber-reinforced concrete beams with low reinforcement ratiosEngineering Structures, 2016
- Predicting the post-cracking behavior of normal- and high-strength steel-fiber-reinforced concrete beamsConstruction and Building Materials, 2015
- Probabilistic model of the crack localization in axially loaded fibrous reinforced concrete barsEngineering Structures, 2014
- Structural behavior of ultra high performance concrete beams subjected to bendingEngineering Structures, 2010
- Toughness testing of ultra high performance fibre reinforced concreteMaterials and Structures, 2008
- Predicting the flexural load–deflection response of steel fibre reinforced concrete from strain, crack-width, fibre pull-out and distribution dataMaterials and Structures, 2007
- Flexural behavior of HSFRC with low reinforcement ratiosEngineering Structures, 2006
- Study of the distribution and orientation of fibers in SFRC specimensMaterials and Structures, 2005
- Cracking behaviour of concrete beams reinforced with a combination of ordinary reinforcement and steel fibersMaterials and Structures, 2000