A New Design Concept for Permanent Magnet Vernier Machine: Positive-Mutual-Coupling for Improved Power Factor and Higher Field-Weakening Capability
- 27 November 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (6) , 5669-5680
Abstract
This article investigates a permanent magnet vernier machine (PMVM) equipped with positive-mutual- coupling (PMC) winding. The conventional winding layout typically presents negative-mutual-coupling (NMC) among the three-phase windings due to the 120° spatial phase shift. It is illustrated that in the conventional NMC winding, the negative phase-mutual inductance leads to increasing q -axis inductance and amplifying armature reaction. On the contrary, the investigated PMC winding exhibits positive phase-mutual inductance, cancellation effect on the q -axis flux linkage, and brings the characteristic current closer to the current limit. This contributes to suppressing armature reaction, improving the power factor, reducing the terminal voltage, and enhancing the field-weakening performance. The generic design methodology to obtain PMC winding is presented and exemplified on a 24-slot, 5-armature pole pair, and 19-rotor pole pair PMVM. Finite element analysis shows that the proposed PMC PMVM could improve the rated power factor and widen the constant torque region. With reduced terminal voltage and more voltage margins, the PMC PMVM can employ a higher q -axis current to generate torque, thus significantly enhancing the output torque and power factor during field-weakening operations. As a result, the output power capability and constant power speed range (CPSR) are improved dramatically. Finally, a PMC PMVM prototype is manufactured to validate the efficacy of PMC winding in improving field-weakening and power factor.Keywords
All Related Versions
This publication has 35 references indexed in Scilit:
- Investigation of Power Factor Characteristic in Permanent Magnet Motors for In-Wheel Direct Drive ApplicationIEEE Transactions on Energy Conversion, 2024
- Critical Review of Direct-Drive Electrical Machine Systems for Electric and Hybrid Electric VehiclesIEEE Transactions on Energy Conversion, 2022
- Modern electric machines and drives for wind power generation: A review of opportunities and challengesIET Renewable Power Generation, 2021
- A Critical Review of Advanced Electric Machines and Control Strategies for Electric VehiclesProceedings of the IEEE, 2020
- Permanent magnet vernier machine: a reviewIET Electric Power Applications, 2019
- Investigation of Spoke Array Permanent Magnet Vernier Machine With Alternate Flux BridgesIEEE Transactions on Energy Conversion, 2018
- Quantitative Comparison of Integral and Fractional Slot Permanent Magnet Vernier MotorsIEEE Transactions on Energy Conversion, 2015
- Design considerations for fractional-slot winding configurations of synchronous machinesIEEE Transactions on Industry Applications, 2006
- Optimal Flux Weakening in Surface PM Machines Using Fractional-Slot Concentrated WindingsIEEE Transactions on Industry Applications, 2005
- PM-Assisted Reluctance Synchronous Motor/Generator (PM-RSM) for Mild Hybrid Vehicles: Electromagnetic DesignIEEE Transactions on Industry Applications, 2004