A Submodule Implementation for Parallel Connection of Capacitors in Modular Multilevel Converters
- 5 August 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 30 (7) , 3518-3527
Abstract
In modular multilevel converters, there is a tradeoff between the switching frequency and the voltage ripple in the submodule capacitors. The reason for this is that it becomes increasingly difficult to balance the capacitor voltages when the switching frequency is reduced. This paper presents a new submodule circuit, which improves the balancing of the capacitor voltages at low switching frequencies. The proposed submodule circuit consists of two capacitors and eight switches, forming a three-level submodule. Ideally, the voltage and current ratings of the switches can be chosen such that the combined power rating of the semiconductors is the same as for the equivalent solution with conventional half-bridge submodules. The proposed submodule circuit provides the possibility of connecting the two capacitors in parallel when the intermediate voltage level is used. This will reduce the capacitor voltage ripple, especially at low switching frequencies, and thus, allow for a reduction of the size, weight, and cost of the submodule capacitors. The proposed submodule circuit is validated by both simulations and experimental results. It is found that the parallel connection of the submodule capacitors will, in fact, significantly improve the balancing of the capacitor voltages.Keywords
This publication has 17 references indexed in Scilit:
- Analysis and operation of modular multilevel converters with phase-shifted carrier PWM2013
- Modular multilevel converter ac motor drives with constant torque form zero to nominal speed2012
- Modular Multilevel Converter With Different Submodule Concepts—Part I: Capacitor Voltage Balancing MethodIEEE Transactions on Industrial Electronics, 2012
- Capacitor voltage ripple shaping in modular multilevel converters allowing for operating region extension2011
- Modular Multilevel Converter topologies with DC-Short circuit current limitation2011
- A modular direct converter for transformerless rail interties2010
- Modular Multilevel Converter: An universal concept for HVDC-Networks and extended DC-Bus-applications2010
- Innovative concepts for hybrid multi-level converters for HVDC power transmission2010
- Control and Experiment of Pulsewidth-Modulated Modular Multilevel ConvertersIEEE Transactions on Power Electronics, 2009
- A New AC/AC Multilevel Converter FamilyIEEE Transactions on Industrial Electronics, 2005