Using Highly Functional Cr2O3 Interfacial Layer to Enhance the Electrical Performance of Au/InP Schottky Diodes
Open Access
- 1 May 2025
- journal article
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (12)
Abstract
Herein, the significant impact of the spin‐coated Cr2O3 interface layer on the electrical properties and performance characteristics of Au/undoped‐InP (Au/InP) Schottky diodes (SD) is reported. The material characterization of spin‐coated Cr2O3 films using a wide variety of analytical techniques, namely, atomic force microscopy, field emission scanning electron microscope, X‐ray diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy, indicate the formation of hexagonal phase, nanocrystalline, and stoichiometric Cr2O3 on InP. Optical absorption measurements reveal a bandgap of ≈3.5 eV. In‐depth analyses and detailed measurements of current‐voltage (I–V) and capacitance‐voltage (C‐V) employed to assess the interface characteristics and electrical performance of the Au/InP (SD) versus Au/Cr2O3/InP (MIS) devices. Compared to SD, MIS revealed superior rectifying properties. Indicating that the Cr2O3 interface layer significantly influences the barrier height (ΦBH) of SD, the estimated ΦBH (0.64 eV (I–V)/0.86 eV (C‐V)) is higher than that of SD (0.57 eV (I–V)/0.67 eV (C‐V)). In addition, Cheungs and Nordes' methods are used to obtain the ΦBH, ideality factor (n), and series resistance (RS). The equivalent ΦBH values obtained from current–voltage, Cheungs, and Nordes methods demonstrate stability and dependability in addition to validating their superior characteristics of MIS devices. The interface state density (NSS) for MIS is lower than the SD's, indicating that the effectiveness of Cr2O3 layer significantly reduces NSS. Analyses to probe the mechanism demonstrate that, in SD and MIS, the Schottky emission controls the higher bias area, while the Poole‐Frenkel emission dominates the reverse conduction mechanism at the lower bias region. The present work convincingly demonstrates the potential application of the Cr2O3 interfacial layer in delivering the enhanced performance and contributes to the progression of electrical devices for emerging electronics and energy‐related applications.Keywords
Funding Information
- National Science Foundation (#DMR‐1827745)
This publication has 75 references indexed in Scilit:
- High‐Performance NiCo2O4/Graphene Quantum Dots for Asymmetric and Symmetric Supercapacitors with Enhanced Energy EfficiencyAdvanced Functional Materials, 2024
- Rationally Engineered Vertically Aligned β‐Ga2−xWxO3 Nanocomposites for Self‐Biased Solar‐Blind Ultraviolet Photodetectors with Ultrafast ResponseAdvanced Materials Technologies, 2023
- Emerging 2D Metal Oxides: From Synthesis to Device IntegrationAdvanced Materials, 2023
- Amorphous Cr 2 O 3 Sheets: A Novel Supercapacitor Electrode MaterialChemistrySelect, 2022
- Green InP/ZnSeS/ZnS Core Multi‐Shelled Quantum Dots Synthesized with Aminophosphine for Effective Display ApplicationsAdvanced Functional Materials, 2021
- InP/ZnS/ZnS Core/Shell Blue Quantum Dots for Efficient Light‐Emitting DiodesAdvanced Functional Materials, 2020
- High Mobility MoS2 Transistor with Low Schottky Barrier Contact by Using Atomic Thick h‐BN as a Tunneling LayerAdvanced Materials, 2016
- 2D Tin Monoxide—An Unexplored p‐Type van der Waals Semiconductor: Material Characteristics and Field Effect TransistorsAdvanced Electronic Materials, 2016
- Effect of rapid thermal annealing on the electrical and structural properties of Ru/n‐InP (100) Schottky rectifiersPhysica Status Solidi (a), 2009
- Heterointerfaces in Semiconductor NanowiresSmall, 2008