Finite element simulation of composite slabs with recycled concrete aggregates: collapse mechanisms and interface behaviour
Authors:
Open Access
- 18 December 2025
- journal article
- Published by Springer Nature in Materials and Structures
- Vol. 59 (1) , 17
Abstract
The growing use of recycled aggregates in concrete represents a sustainable strategy to reduce the environmental impact of construction, but their influence on structural behaviour remains insufficiently understood. This study presents a numerical investigation of steel–concrete composite slabs incorporating recycled aggregate concrete (RAC), aimed at reproducing the experimental results obtained on twelve full-scale specimens with different aggregate replacement ratios (0–100%) and span lengths (2.4–3.2 m). Advanced non-linear finite element models were developed in ABAQUS to simulate the load–deflection response and interface debonding between the concrete and steel sheeting. A cohesive interaction law was implemented to capture progressive bond degradation and shear transfer. The comparison between numerical and experimental data demonstrates that the models accurately predict the load-bearing capacity and stiffness trends, while highlighting the beneficial effect of recycled aggregates on interface adhesion due to their increased surface roughness. The study confirms the potential of cohesive modelling as a reliable and cost-effective tool for analysing and designing composite slabs made with recycled concrete.Keywords
Funding Information
- Ministero dell'Università e della Ricerca (SARCOS PRIN2022 – CUP: F53D23002030006)
- University of Cagliari
This publication has 25 references indexed in Scilit:
- Flexural behavior of concrete-filled steel box composite slabs with different configurationsStructures, 2025
- Mechanical behavior of composite slabs with recycled concrete aggregates: A preliminary studyStructures, 2024
- Experimental and finite element evaluations of single-T composite cold-formed steel beam with concrete slabEngineering Structures, 2024
- Numerical simulation of steel-concrete composite beams and slabs at elevated temperaturesEngineering Structures, 2024
- Three-dimensional finite element modeling for bending and pull-out tests of composite slabsEngineering Structures, 2023
- Mechanical performance of recycled aggregate concrete in green civil engineering: ReviewCase Studies in Construction Materials, 2023
- Analysis and design of long-term responses of simply-supported steel–concrete composite slabsJournal of Building Engineering, 2022
- The environmental impact of cement production in Europe: A holistic review of existing EPDsCleaner Environmental Systems, 2021
- Environmental impact assessment of fly ash and silica fume based geopolymer concreteJournal of Cleaner Production, 2020
- Analysis of deflections of composite slabs with profiled sheeting up to the ultimate momentJournal of Constructional Steel Research, 2006