Reconfigurable Modular Fault-Tolerant Converter Topology for Switched Reluctance Motors
- 23 November 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (3) , 2890-2902
Abstract
Switched reluctance motors can be driven in a conventional or a modular way. In the conventional driving method, a number of stator coils are connected together and driven from one converter module. In the modular driving method, each stator coil is driven from one separate converter module. The conventional driving method provides better drive performance (i.e. efficiency, torque ripple, and power density) but narrower speed range at rated torque and less fault-tolerance capability. The modular driving method provides wider speed range at rated torque and much better fault-tolerance capability. Therefore, in low speed healthy operation, the conventional driving method is preferable while for high speed and faulty condition, the modular driving method should be used. In this article, a converter topology that can be reconfigured to operate in conventional and modular driving ways is proposed and analyzed. Using the proposed converter, the benefits of the conventional and the modular driving methods can be obtained by proper configuration of the converter. Also, a fault-tolerance strategy that results in symmetrical and high-performance operation of the drive is proposed. The performance of the converter is assessed by simulations and experimental measurements.Keywords
Funding Information
- ModulAr SBO Project through Flanders Make vzw
- Strategic Research Centre for the Manufacturing Industry
This publication has 22 references indexed in Scilit:
- Design and Initial Testing of a High-Speed 45-kW Switched Reluctance Drive for Aerospace ApplicationIEEE Transactions on Industrial Electronics, 2016
- New Integrated Multilevel Converter for Switched Reluctance Motor Drives in Plug-in Hybrid Electric Vehicles With Flexible Energy ConversionIEEE Transactions on Power Electronics, 2016
- An Integrated Multiport Power Converter With Small Capacitance Requirement for Switched Reluctance Motor DriveIEEE Transactions on Power Electronics, 2015
- Modeling of a Switched Reluctance Machine Based on the Invertible Torque FunctionIEEE Transactions on Magnetics, 2008
- Torque ripple minimization in switched reluctance motor drives2004
- Minimization of torque ripple in SRM drivesIEEE Transactions on Industrial Electronics, 2002
- Advantages of switched reluctance motor applications to EV and HEV: design and control issuesIEEE Transactions on Industry Applications, 2000
- A novel power converter with voltage-boosting capacitors for a four-phase SRM driveIEEE Transactions on Industrial Electronics, 1998
- Torque ripple minimization in switched reluctance motor drives by PWM current controlIEEE Transactions on Power Electronics, 1996
- Instantaneous torque control of electric motor drives1985