Low-Power Cache Design Using 7T SRAM Cell
Authors:
- 16 April 2007
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing
- Vol. 54 (4) , 318-322
Abstract
On-chip cache consumes a large percentage of the whole chip area and expected to increase in advanced technologies. Charging/discharging large bit lines capacitance represents a large portion of power consumption during a write operation. We propose a novel write mechanism which depends only on one of the two bit lines to perform a write operation. Therefore, the proposed 7T SRAM cell reduces the activity factor of discharging the bit line pair to perform a write operation. Experimental results using HSPICE simulation shows that the write power saving is at least 49%. Both read delay and static noise margin are maintained after carefully sizing the cell transistorsKeywords
This publication has 8 references indexed in Scilit:
- A low-power SRAM using hierarchical bit line and local sense amplifiersIEEE Journal of Solid-State Circuits, 2005
- SRAM design on 65-nm CMOS technology with dynamic sleep transistor for leakage reductionIEEE Journal of Solid-State Circuits, 2005
- 90% write power-saving SRAM using sense-amplifying memory cellIEEE Journal of Solid-State Circuits, 2004
- Low-leakage asymmetric-cell SRAMIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2003
- Low power SRAM design using hierarchical divided bit-line approach2002
- Low-power SRAM design using half-swing pulse-mode techniquesIEEE Journal of Solid-State Circuits, 1998
- Static-noise margin analysis of MOS SRAM cellsIEEE Journal of Solid-State Circuits, 1987
- A 64Kb full CMOS RAM with divided word line structure1983