FE Modelling and Analysis of Beam Column Joint Using Reactive Powder Concrete
Open Access
Abstract
Reactive powder concrete (RPC) is used in the beam-column joint region in two out of four frames. Finite element modeling of all specimens is developed by using ABAQUS software. Displacement controlled analysis is used rather than load control analysis to obtain the actual response of the structure. The prepared models were verified by using experimental results. The results showed that using RPC in the joint region increased the overall strength of the structure by more than 10%. Moreover, it also helped in controlling the crack width. Furthermore, using RPC in the joint region increased the ductility of the structures. Comparisons were made by varying the size of the mesh and viscosity parameter values. It was found that by increasing the mesh size and viscosity parameter value, analysis time and the number of steps during analysis were reduced. This study provides a new modeling approach using RPC beam-column joint to predict the behavior and response of structures and to improve the shear strength deformation against different structural loading.Keywords
This publication has 33 references indexed in Scilit:
- Effectiveness of spirally shaped stirrups in reinforced concrete beamsEngineering Structures, 2013
- Assessing drying shrinkage and water permeability of reactive powder concrete produced in Hong KongConstruction and Building Materials, 2012
- Shear behavior of continuous reinforced concrete T-beams using wire rope as internal shear reinforcementConstruction and Building Materials, 2011
- Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into considerationArchives of Civil and Mechanical Engineering, 2011
- Effect of pre-setting pressure applied to mechanical behaviours of reactive powder concrete during setting phaseConstruction and Building Materials, 2011
- A preliminary study of reactive powder concrete as a new repair materialConstruction and Building Materials, 2007
- Lateral load response of high performance fiber reinforced concrete beam–column jointsConstruction and Building Materials, 2005
- Development of a Light Weight Reactive Powder ConcreteJournal of Advanced Concrete Technology, 2004
- The Sherbrooke Reactive Powder Concrete FootbridgeStructural Engineering International, 1998
- Composition of reactive powder concretesCement and Concrete Research, 1995