Analysis of Friction-Induced Vibration Behavior of Train Brake Systems Considering the Effect of Environmental Temperature
Open Access
- 11 June 2026
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 14 (6) , 236
Abstract
Train brake systems are characterized by strong friction and open-system features during the service process. Low environmental temperatures significantly affect the contact interface and the attrition characteristics of the braking frictional couple, thus intensifying friction-induced vibration and threatening operational safety. To elucidate the impact of environmental temperature on the frictional vibration characteristics of train brake systems, braking deceleration tests under different environmental temperatures were first conducted to obtain the evolution of vibration, noise, and friction coefficient with environmental temperature and brake disc rotational speed. Then, the Stribeck friction parameters under different environmental temperatures were identified using a genetic algorithm. On this basis, a brake system dynamic model was developed, incorporating disc–pad friction, wheel–rail adhesion, and the relative torsion between the brake disc and the wheelset, enabling accurate examination of the vibrational behaviour arising from friction under different environmental temperatures. And the dynamic relationship among environmental temperature, interface friction parameters, and vibration characteristics of the brake system during braking deceleration was elucidated. The findings indicate that as the environmental temperature decreases, the dynamic friction coefficient increases during the relatively high-speed braking phase, intensifying high-frequency unstable vibrations of the braking assembly. During the relatively low-speed braking phase, the friction coefficient exhibits an obvious negative-slope relationship with vehicle speed that means the friction coefficient increases as the speed decreases, and this negative slope effect is enhanced under low-temperature conditions. Consequently, it triggers intense stick–slip motion at the disc–pad interface and even severe vibrations of various components in the brake system, leading to a sudden increase in vibration intensity in the relatively low-speed range.Keywords
Funding Information
- National Natural Science Foundation of China (52305209)
- National Natural Science Foundation of China (52505220)
- National Natural Science Foundation of China (U22A20181)
- Sichuan University of Science and Engineering (2026NSFSC1268)
- Wenzhou Basic Public Welfare Science and Technology Project (G2023047)
This publication has 34 references indexed in Scilit:
- A review on research of system dynamics and multi-source fault diagnosis of key components in high-speed trainChinese Journal of Mechanical Engineering, 2026
- Effect of perforated friction block design on the tribological behavior of high-speed train brake interfaces under different ambient temperaturesEngineering Failure Analysis, 2026
- Phase portraits and bifurcations induced by static and dynamic friction modelsNonlinear Dynamics, 2025
- Effective parameter identification of the GMS friction model for feed systems in CNC machinesControl Engineering Practice, 2024
- The Effects of Friction Block Shape on Friction-Induced Wear, Vibration, and Noise of Train Brake Interface at Low TemperatureTribology Letters, 2024
- An elastic-plastic theoretical analysis model of wheel-rail rolling contact behaviourActa Mechanica Sinica, 2023
- Study on reduction of squeal noise of disc brake system considering braking temperature of urban railway vehicleJournal of Mechanical Science and Technology, 2023
- A Nonlinear Friction Identification Method Combining Separable Least Squares Approach and Kinematic Orthogonal PropertyInternational Journal of Precision Engineering and Manufacturing, 2022
- Bifurcation and Chaotic Behaviors of Vehicle Brake System Under Low Speed Braking ConditionJournal of Vibration Engineering & Technologies, 2021
- Identification of mass and sliding friction parameters of machine tool feed drive using recursive least squares methodThe International Journal of Advanced Manufacturing Technology, 2020