Initial Rotor Position Estimation of SynRM Based on Pulsating Voltage Injection Combined With Finite Position Set Algorithm
Authors:
- 24 August 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (4) , 4321-4331
Abstract
Initial rotor position estimation is the basis of stable starting without reverse rotation; also initial position estimation directly affects the maximum starting torque. DC pulse voltage injection is one of the common methods for estimating the initial rotor position, which has low implementation complexity. However, the conventional DC voltage pulse injection methods, which works through injecting three DC voltage pulses, has low accuracy and slow response in estimating initial position. A rotor initial position estimation method based on pulsating voltage injection combined with an iteration algorithm is proposed in this paper. This method works by injecting only one DC voltage pulse to the motor and measuring the peak values of currents and fluxes of the motor; afterwards these values should be applied to an iterative algorithm. The iteration algorithm in the proposed method leads to increment of the accuracy of initial position estimation, and reduction of the number of injected dc pulses in comparison with the conventional methods. The performance of the proposed method is verified experimentally on a synchronous reluctance motor (SynRM). Also, a comparison between the two conventional methods and the proposed method is provided by this SynRM drive experimental setup.Keywords
This publication has 34 references indexed in Scilit:
- Full Speed Region Sensorless Drive of Permanent-Magnet Machine Combining Saliency-Based and Back-EMF-Based DriveIEEE Transactions on Industrial Electronics, 2016
- Comparative Investigation of Pseudorandom High-Frequency Signal Injection Schemes for Sensorless IPMSM DrivesIEEE Transactions on Power Electronics, 2016
- Initial Rotor Position and Magnetic Polarity Identification of PM Synchronous Machine Based on Nonlinear Machine Model and Finite Element AnalysisIEEE Transactions on Magnetics, 2010
- Initial rotor position estimation and sensorless direct torque control of surface-mounted permanent magnet synchronous motors considering saturation saliencyIET Electric Power Applications, 2008
- Initial rotor position estimation of an interior permanent-magnet synchronous machine using carrier-frequency injection methodsIEEE Transactions on Industry Applications, 2005
- Initial rotor position estimation method for PM motorsIEEE Transactions on Industry Applications, 2003
- A sensorless initial rotor position estimation scheme for a direct torque controlled interior permanent magnet synchronous motor driveIEEE Transactions on Power Electronics, 2003
- Sensorless rotor position estimation of an interior permanent-magnet motor from initial statesIEEE Transactions on Industry Applications, 2003
- Initial rotor angle detection of a nonsalient pole permanent magnet synchronous machine2002
- Sensorless rotor-position detection from zero to rated speed for an integrated PM synchronous motor driveIEEE Transactions on Industry Applications, 1996