The Impact of Variation in Filling Ratios, Evacuation Pressure, and Heat Input on Thermal Performance of Pulsating Heat Pipe
- 30 December 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 12 (2) , 259-269
Abstract
The reliability and computational speed of modern electronic systems have a significant dependence on the methods of heat management. In present scenario, passive cooling methods based on two-phase flow, such as heat pipes, have emerged as a preferred option for electronic thermal management. The pulsating heat pipe (PHP) is an ideal device for handling low and high heat fluxes due to its simple construction and compactness. The impact of some construction parameters on the thermo-hydrodynamics of PHP is still unresolved. Hence, to characterize the effects of construction parameters, simultaneous pressure, temperature measurement, and visualization experiments have been conducted under different heat inputs and evacuation pressure. Additionally, the flow patterns, effective thermal conductivity, and resistance have been mapped to correlate the flow characteristics and the thermal performance. A closed-loop two-turns semitransparent PHP test section of hydraulic diameter 2.3 mm was constructed having four 202 mm long adiabatic channels. The experiments were performed using partially filled degassed pure water as the working fluid up to 70% by volume in vertical orientation and bottom heating mode. The unstable oscillations of evaporator wall temperature occur until a pseudo-steady-state is achieved for different heat inputs. The thermal performance was enhanced and successful flow transitions occurred at an optimum filling ratio (FR), low pressure, and high heat input. Low evacuation pressure, 60% FR, and 25 W heat input were found to be efficient working conditions and optimum for maximum performance in this study.Keywords
Funding Information
- Ministry of Electronics and Information Technology through the Visvesvaraya Ph.D. Scheme (MeitY/PhD/2552)
This publication has 25 references indexed in Scilit:
- Influence of process variables on the hydrodynamics and performance of a single loop pulsating heat pipeInternational Journal of Heat and Mass Transfer, 2014
- Effects of hydrophilic surface on heat transfer performance and oscillating motion for an oscillating heat pipeInternational Journal of Heat and Mass Transfer, 2014
- Combination study of operation characteristics and heat transfer mechanism for pulsating heat pipeApplied Thermal Engineering, 2014
- Local heat transfer measurement and thermo-fluid characterization of a pulsating heat pipeInternational Journal of Thermal Sciences, 2014
- Understanding transport mechanism of a self-sustained thermally driven oscillating two-phase system in a capillary tubeInternational Journal of Heat and Mass Transfer, 2013
- An insight into thermo-hydrodynamic coupling in closed loop pulsating heat pipesInternational Journal of Thermal Sciences, 2004
- Evolution of cooling technology for electrical, electronic, and microelectronic equipmentIEEE Transactions on Components and Packaging Technologies, 2003
- Closed-loop pulsating heat pipeApplied Thermal Engineering, 2001
- Assessment of high-heat-flux thermal management schemesIEEE Transactions on Components and Packaging Technologies, 2001
- The temperature dependence of component failure rateMicroelectronics Reliability, 1980