Influencing FTO thin film growth with thin seeding layers: a route to microstructural modification
Open Access
- 24 August 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 3 (36) , 9359-9368
Abstract
We report on the seeded growth of fluorine doped tin oxide (FTO) polycrystalline transparent conducting oxide (TCO) thin films on float glass using a novel two-step chemical vapour deposition (CVD) method. Aerosol-assisted CVD (AACVD) was used to grow a seed layer to direct and promote full film growth via an atmospheric pressure CVD (APCVD) overlay. The method allowed for reproducible control over morphology and denser, rougher, higher-performing TCO at a relatively low growth temperature (500 °C). Growth promotion depended on seeding time with an optimal seeding time being present, below which morphology control and conformal coverage was unavailable. The film properties and functional characteristics were characterised by SEM, AFM, XRD, XPS, UV-Vis-Near IR transmittance-reflectance and Hall Effect probe measurements. Highly transparent and electrically conductive films, comparable to commercial materials and with high roughness and low transmission haze values indicate the process yields high quality films with a controllable morphology that can be tuned to desired application. The versatile method provides a route towards the morphological control of high-quality FTO thin films with high optical clarity and low-emissivity properties and can be readily extended to a variety of different substrates and metal oxide materials.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/K001515)
This publication has 85 references indexed in Scilit:
- Investigations into the impact of various substrates and ZnO ultra thin seed layers prepared by atomic layer deposition on growth of ZnO nanowire arrayDiscover Nano, 2012
- Impact of “terminal effect” on Cu electrochemical deposition: Filling capability for different metallization optionsMicroelectronic Engineering, 2011
- Cu Electrodeposition on Resistive Substrates in Alkaline Chemistry: Effect of Current Density and Wafer RPMJournal of the Electrochemical Society, 2011
- Semiconducting Sn3O4 nanobelts: Growth and electronic structureJournal of Applied Physics, 2010
- Nucleation on resistive substrates: Analysis of effect on film uniformityElectrochimica Acta, 2007
- A comprehensive investigation of the origins of surface roughness and haze in polyethylene blown filmsJournal of Applied Polymer Science, 2002
- Nanocrystal seeding: A low temperature route to polycrystalline Si filmsApplied Physics Letters, 1994
- Intrinsic performance limits in transparent conducting oxidesJournal of Materials Science Letters, 1992
- Structural properties of SnO2: F films deposited by spray pyrolysis techniqueThin Solid Films, 1988
- Thickness Dependence of Transport Properties of Doped Polycrystalline Tin Oxide FilmsJournal of the Electrochemical Society, 1985