Microstructural Analysis and Mechanical Properties of a Hybrid Al/Fe2O3/Ag Nano-Composite
Open Access
- 8 May 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (9) , 4730
Abstract
This work aims to define the microstructure and to study the mechanical properties of an Al matrix incorporated with various amounts of Fe2O3 (3, 6, 9, 12 and 15 wt.%) with a constant amount of Ag at 1 wt.%. Al/Fe2O3 + Ag hybrid nano-composite samples are manufactured using powder metallurgy. An aluminum matrix is considered an important alloy, owing to its properties such as being lightweight, strong and corrosion and wear resistant, which enable it to be used in many applications, such as electronics, aerospace and automotive purposes. Various examinations have been performed for the samples of this work, such as Field Emission Scanning Electron Microscopy (FESEM) and X-ray Diffraction (XRD) analysis to estimate the microstructure and phases of manufactured nano-composites. Mechanical testing is also carried out, such as micro-hardness testing, compressive testing and wear testing, to estimate the mechanical properties of the hybrid nano-composites. The results of FESEM and XRD demonstrate that Fe2O3 and Ag nanoparticles are uniformly distributed and dispersed into the Al matrix, whereas the mechanical tests show that enhancement t micro-hardness, compressive strength of 12 wt.% Fe2O3 + 1Ag and wear rate decrease to a minimum value of 12 wt.% of Fe2O3 + 1Ag.Keywords
This publication has 19 references indexed in Scilit:
- Properties of aluminum matrix Nano composites prepared by powder metallurgy processingJournal of King Saud University – Engineering Sciences, 2017
- Tribological Characterization of Hybrid Metal Matrix Composites Processed by Powder MetallurgyActa Metallurgica Sinica (English Letters), 2017
- Low cost manufacturing of aluminium-alumina compositesAdvances in Materials and Processing Technologies, 2015
- Microstructural, mechanical and tribological properties of Al–7Si–(0–5)Zn alloysMaterials & Design (1980-2015), 2014
- Investigating aluminum alloy reinforced by graphene nanoflakesMaterials Science and Engineering: A, 2014
- Manufacturing of Aluminum Matrix Composites Reinforced with Iron Oxide (Fe3O4) Nanoparticles: Microstructural and Mechanical PropertiesMetallurgical and Materials Transactions B, 2013
- Preparation and characterization of thermosensitive organic–inorganic hybrid microgels with functional Fe3O4 nanoparticles as crosslinkerPolymer, 2011
- The effects of MgO addition on microstructure, mechanical properties and wear performance of zirconia-toughened alumina cutting insertsJournal of Alloys and Compounds, 2010
- Development of high-performance A356/nano-Al2O3 compositesMaterials Science and Engineering: A, 2009
- Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strengthScripta Materialia, 2006