Static load test and bearing capacity analysis of broken line pretensioned prestressed concrete I-beam
Authors:
Open Access
- 1 August 2025
- journal article
- research article
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 20 (8) , e0328562
Abstract
The construction technology of broken line pretensioned method, which is suitable for long-span bridges, can greatly improve the flexural strength of concrete members. To study the mechanical performance and failure mode of broken line pretensioned prestressed concrete I-beam, an I-beam with a span of 30 m was taken as the research object and on-site static load tests were carried out. Based on the ABAQUS finite element software, the numerical simulation was carried out to analyze the mechanical properties and failure behavior of the I-beam under the concentrated load, and the ultimate flexural capacity of the I-beam was studied in combination with the theoretical analysis. In addition, the optimized arrangement of prestressed tendons was analyzed. The results show that in the on-site static load tests, the strain values at the mid-span section and 1/4-span basically show a linear growth trend, and the I-beam is always in the elastic stage during the tests. The numerical simulation results are in general agreement with the test data with regard to strain, displacement, and neutral axis position. When the concentrated load reaches 1910 kN, the prestressed tendons at the bottom of the I-beam enter the yield state. The prestressed tendons play a controlling role in the ultimate bearing capacity of the I-beam. The numerical simulation result of the ultimate bending moment in the mid-span section is 3.55% larger than the theoretical analysis result, and the theoretical calculation formulas tend to be conservative. When the prestressed tendons are arranged by the four-fold point method, the I-beam has higher stiffness and bearing capacity after concrete cracking. The research results can provide a reference for the design and construction of broken line pretensioned prestressed concrete I-beam.Keywords
Funding Information
- the Shandong Provincial Natural Science Foundation, China (ZR2021ME238)
- Natural Science Foundation of Ningxia Province (ZR2024ME056)
- Natural Science Foundation of Tianjin Municipal Science and Technology Commission (51908338)
- Shandong Provincial Key Laboratory of Eco-environmental Science for Yellow River Delta (2023KJ123)
This publication has 12 references indexed in Scilit:
- Prediction of load-bearing capacity of RC columns (CWA) using Artificial Neural Networks (ANN) trained on a hybrid experimental database HEXPJournal of Engineering Research, 2024
- Rapid Analysis of CFRP-Reinforced Concrete Structures Using Artificial Neural Networks2024
- Least squares collocation method in Moho depth determination in Iran using gravity gradient dataHeliyon, 2024
- PHYSICS-INFORMED NEURAL NETWORK FOR NONLINEAR STRUCTURAL SYSTEM IDENTIFICATION2023
- Numerical simulation and field test studies on mechanical behavior of steel plate girder strengthened by external prestressed tendonStructures, 2021
- Comparative study of modeling methods used to simulate initial stresses in prestressed beams towards manual analysisMATEC Web of Conferences, 2019
- Experimental Study on Creep Behavior of Prestressed Concrete Beams with Pretensioned Bent-Up Tendons for 600 DaysApplied Mechanics and Materials, 2013
- Non-linear analysis of pre-tensioned concrete planar beamsEngineering Structures, 2013
- Curved, precast, pretensioned concrete I-girder bridgesPCI Journal, 2008
- Direct Solution for Elastic Prestress Loss in Pretensioned Concrete GirdersPractice Periodical on Structural Design and Construction, 2000