Two-Input Two-Output Control of Blended Fuel HCCI Engines
Authors:
- 8 April 2013
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Precise cycle-to-cycle control of combustion is the major challenge to reduce fuel consumption in Homogenous Charge Compression Ignition (HCCI) engines, while maintaining low emission levels. This paper outlines a framework for simultaneous control of HCCI combustion phasing and Indicated Mean Effective Pressure (IMEP) on a cycle-to-cycle basis. A dynamic control model is extended to predict behavior of HCCI engine by capturing main physical processes through an HCCI engine cycle. Performance of the model is validated by comparison with the experimental data from a single cylinder Ricardo engine. For 60 different steady state and transient HCCI conditions, the model predicts the combustion phasing and IMEP with average errors less than 1.4 CAD and 0.2 bar respectively.A two-input two-output controller is designed to control combustion phasing and IMEP by adjusting fuel equivalence ratio and blending ratio of two Primary Reference Fuels (PRFs). The designed controller consists of a Discrete Sliding Mode Controller (DSMC) and a feed-forward integral controller. The results of testing the controller on a detailed complex HCCI model shows the controller can accurately track both IMEP and combustion phasing over a range of HCCI operating conditions. In addition, the designed controller shows the ability to maintain a minimal disturbance to desired combustion phasing and IMEP when the engine speed and the intake manifold temperature change.Keywords
This publication has 31 references indexed in Scilit:
- Real-time control oriented HCCI engine cycle-to-cycle dynamic modellingInternational Journal of Automation and Computing, 2011
- Physics-Based Model Predictive Control of HCCI Combustion Phasing Using Fast Thermal Management and VVAIEEE Transactions on Control Systems Technology, 2011
- Modeling Ranges of Cyclic Variability for HCCI Ignition Timing Control2011
- Characterizing the cyclic variability of ignition timing in a homogeneous charge compression ignition engine fuelled with n-heptane/iso-octane blend fuelsInternational Journal of Engine Research, 2008
- Research on expansion of operating windows of controlled homogeneous auto-ignition enginesInternational Journal of Engine Research, 2007
- SENSITIVITY ANALYSIS & MODELING OF HCCI AUTO-IGNITION TIMINGIFAC Proceedings Volumes, 2007
- Heat Release Analysis on Combustion and Parametric Study on Emissions of HCCI Engines Fueled with 2-Propanol/n-Heptane Blend FuelsEnergy & Fuels, 2006
- Combustion Limits and Efficiency in a Homogeneous Charge Compression Ignition EngineInternational Journal of Engine Research, 2006
- Transient Control of a Multi Cylinder HCCI Engine During a Drive CycleSAE International Journal of Advances and Current Practices in Mobility, 2005
- Variable Valve Actuation for Timing Control of a Homogeneous Charge Compression Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 2005