Effect of Microalloying Rare-Earth Nd on Microstructure Evolution and Mechanical Property of Cu Alloy
Open Access
Abstract
Cu alloys have been widely used in the manufacture of liners because of their high density, good plasticity, and excellent thermal conductivity. In order to achieve excellent jet stability and penetration performance, it is necessary to further improve the mechanical properties of Cu-based liners. Nevertheless, the simultaneous enhancement of strength and ductility of the Cu alloys remains a huge challenge due to the strength–ductility trade-off phenomenon of metals/alloys. In this study, the microstructure evolution of rare earth Nd-modified Cu alloy and its effect on mechanical properties were investigated using OM, SEM, EBSD, and TEM techniques. The results show that the ultimate tensile strength (218 MPa) and elongation (50.7%) of sample 1 without Nd are the lowest. With increasing Nd content; the tensile strength and elongation of the samples increase; and the mechanical properties of sample 4 are the best, with a tensile strength of 278.6 MPa and elongation of 65.2%. In addition, with the increase in Nd content, not only is the grain size of the Cu-Nd alloy refined, but also the strength and plasticity are improved so that the strength–ductility trade-off phenomenon is improved. The strength improvement is mainly attributed to grain refinement strengthening, dispersion strengthening, and strain hardening. The increase in ductility is mainly related to the improvement of the microstructure heterogeneity by the Nd element.Keywords
Funding Information
- the Institute 52, Collaborative Funding Initiatives (NBFJ2022-29, 2021GG0273)
- Inner Mongolia key technology research project (NBFJ2022-29, 2021GG0273)
This publication has 29 references indexed in Scilit:
- Simultaneously enhancing strength and ductility of coarse grain Cu–Al alloy via a macro dual-cable structureComposites Part B: Engineering, 2024
- Effect of rare earth alloy addition on the microstructure and abrasion resistance of brazed diamonds with Cu-Sn-Ti filler metalDiamond and Related Materials, 2022
- Making Al-Cu-Mg alloy tough by Goss-oriented grain refinementJournal of Alloys and Compounds, 2022
- Effect of Nd addition on the microstructure, mechanical properties, shape memory effect and corrosion behaviour of Cu–Al–Ni high-temperature shape memory alloysJournal of Alloys and Compounds, 2021
- Effects of Ce and Y addition on microstructure evolution and precipitation of Cu-Mg alloy hot deformationJournal of Alloys and Compounds, 2019
- Influence of electric current intensity on the performance of electroformed copper liner for shaped charge applicationDefence Technology, 2017
- Strengthening mechanisms in a high-strength bulk nanostructured Cu–Zn–Al alloy processed via cryomilling and spark plasma sinteringActa Materialia, 2013
- On the Significance of Nature of Strain-Induced Martensite on Phase-Reversion-Induced Nanograined/Ultrafine-Grained Austenitic Stainless SteelMetallurgical and Materials Transactions A, 2009
- Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper–zinc alloysActa Materialia, 2008
- Analysis of intergranular impurity concentration and the effects on the ductility of copper-shaped charge jetsMetallurgical and Materials Transactions A, 2004