ARES, a variable stiffness actuator with embedded force sensor for the ATLAS exoskeleton
Authors:
- M. CestariMCM. Cestari
- D. Sanz-MerodioDSD. Sanz-Merodio
- J.C. ArevaloJAJ.C. Arevalo
- E. GarciaEGE. Garcia
- 20 October 2014
- journal article
- research article
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 41 (6) , 518-526
Abstract
Purpose: – The purpose of this study is to present a variable stiffness actuator, one of whose main features is that the compliant elements simultaneously allow measuring of the torque exerted by the joint. Conceived as a force-controlled actuator, this actuator with Adjustable Rigidity and Embedded Sensor (ARES) is intended to be implemented in the knee of the ATLAS exoskeleton for children to allow the exploitation of the intrinsic dynamic during the locomotion cycle. Design/methodology/approach: – A set of simulations were performed to evaluate the behavior of the actuator mechanism and a prototype of the variable impedance actuator was incorporated into the exoskeleton’s knee and evaluations of the torque measurements capabilities along with the rigidity adjustments were made. Findings: – Mass and inertia of the actuator are minimized by the compact design and the utilization of the different component for more than one utility. By a proper match of the compliance of the joint and the performed task, good torque measurements can be achieved and no bandwidth saturation is expected. Originality/value: – In the actuator, the compliant elements simultaneously allow measuring of the torque exerted by the join. By a proper match of the compliance of the joint and the performed task, good torque measurements can be achieved and no bandwidth saturation is expected.Keywords
This publication has 23 references indexed in Scilit:
- Variable impedance actuators: A reviewRobotics and Autonomous Systems, 2013
- Control Motion Approach of a Lower Limb Orthosis to Reduce Energy ConsumptionInternational Journal of Advanced Robotic Systems, 2012
- DEVELOPMENT OF THE ATLAS LOWER-LIMB ACTIVE ORTHOSIS2011
- A passive exoskeleton with artificial tendons: Design and experimental evaluation2011
- AwAS-II: A new Actuator with Adjustable Stiffness based on the novel principle of adaptable pivot point and variable lever ratio2011
- A Series Elastic- and Bowden-Cable-Based Actuation System for Use as Torque Actuator in Exoskeleton-Type RobotsThe International Journal of Robotics Research, 2006
- Biologically Inspired Joint Stiffness Control2006
- The RoboKnee: an exoskeleton for enhancing strength and endurance during walking2004
- Series elastic actuators2002
- Series elastic actuator development for a biomimetic walking robot1999