Effects of Temperature on the Bearing Strength of CF/Epoxy Pinned Joints
Authors:
- 1 February 2007
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 41 (3) , 335-351
Abstract
Pinned joint bearing tests are conducted at room temperature (25°C) and at high (150°C) and low (-100°C) temperatures for CF/epoxy quasi-isotropic laminates cured at 180°C with two stacking sequences, namely, [0/45/-45/90]3S and [90/-45/45/0]3S. Then, the evolution of microscopic damage as a function of load is examined by using an optical microscope. This article presents an original set of experimental data on the bearing strength of CF/epoxy pinned joints at high and low temperatures, as well as room temperature, while the previous studies did not cover the wide range of temperatures. Moreover, a technique for dynamically monitoring the load is developed to obtain the damage at the maximum load. The critical damage has not been distinguished from the secondary ones in the previous literature. It is found that the bearing failure of a pinned joint is composed of various damages depending on environmental temperatures; further, the strength of the pinned joint is closely related to the compressive kinking failure of all the inner 0° layers. Other characteristic features of the damage evolution at each temperature are discussed in detail.Keywords
This publication has 15 references indexed in Scilit:
- Bearing strength and failure behavior of bolted composite joints (part II: modeling and simulation)Composites Science and Technology, 2005
- The Response of Composite Joints with Bolt-Clamping Loads, Part I: Model DevelopmentJournal of Composite Materials, 2002
- Effects of Temperature and Stacking Sequence on the Mode I Interlaminar Fracture Behavior of Composite LaminatesKey Engineering Materials, 2000
- Effect of Isothermal Aging on Ultimate Strength of High-Temperature Composite Materials for SST StructuresJournal of Composite Materials, 1999
- Microscopic Damage of Quasi-Isotropic Carbon/Epoxy Laminates at Various TemperaturesJournal of the Society of Materials Science, Japan, 1998
- Long-Term Thermo-Oxidative Aging in Composite Materials: Experimental MethodsJournal of Composite Materials, 1998
- Technological problem of very low temperature CFRP fuel tank for reuse in the space and future research plan.Journal of the Japan Society for Composite Materials, 1998
- Moisture and Temperature Effects of the Compressive Failure of CFRP Unidirectional LaminatesJournal of Composite Materials, 1997
- Bearing Failure of Bolted Composite Joints. Part II: Model and VerificationJournal of Composite Materials, 1996
- Compression testing of carbon fibre-reinforced plastics exposed to humid environmentsComposites, 1987