Investigation on Humidity Effect on Partial Discharge Considering Thermal Aging
Authors:
- 5 September 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2325-2330
Abstract
Throughout the years, the humidity effect on Partial Discharge Inception Voltage (PDIV) has been investigated revealing the complexity of the interaction between moisture and insulation material. Although the importance of these studies, the Electrical Machine (EM) insulation system experiences combined stresses when in service. Thus, attention is paid to the impact of humidity on PDIV under different thermal aging levels, since the hygroscopicity of insulation material might change during its lifetime. For the experimental investigation, three groups of twisted pairs are prepared and one is unaged while the remaining two are thermally aged at 250°C for 48 and 96 hours respectively. The PDIV and insulation capacitance under sinusoidal excitation is then measured at a fixed 30 °C ambient temperature with three different relative humidity conditions: 30%, 45%, and 60%. The obtained results are discussed and an explanation of the combined effect of humidity and thermal aging is given.Keywords
This publication has 15 references indexed in Scilit:
- Reliability of low voltage inverter-fed motors: What have we learned, perspectives, open points2017
- Partial discharge characteristics of twisted magnet wire under high frequency AC voltage2014
- Turn-to-turn capacitance variations correlated to PDIV for AC motors monitoringIEEE Transactions on Dielectrics and Electrical Insulation, 2013
- Round-robin test on repetitive PD inception voltage of twisted-pairs2010
- Investigation of partial discharge with twisted enameled wires in atmospheric humid air by optical emission spectroscopyIEEE Transactions on Dielectrics and Electrical Insulation, 2010
- Effects of ambient humidity and temperature on partial discharge characteristics of conventional and nanocomposite enameled magnet wiresIEEE Transactions on Dielectrics and Electrical Insulation, 2008
- Investigations into the effect of humidity on stator winding partial dischargesIEEE Transactions on Dielectrics and Electrical Insulation, 2005
- Motor Winding Problems Caused by Inverter DrivesIEEE Industry Applications Magazine, 2003
- The influence of several environmental conditions on the partial discharge characteristics and on the lifetime of magnet wires under inverter pulse operation2002
- Loading Transformers By TemperatureTransactions of the American Institute of Electrical Engineers, 1930