Application of Low-Cost Sensors for Accurate Ambient Temperature Monitoring
Open Access
Abstract
In structures with reduced monitoring budgets, the high cost of commercial metering devices is always an obstacle for monitoring structural health. This might be an issue when temperatures must be measured for both structural and environmental reasons. To fill this gap, in this paper, a novel monitoring system is proposed for the accurate measurement of indoor temperature in buildings. This protocol is characterized by its generality, as it can be easily adapted to measure any structural or environmental parameters on site. The proposed monitoring system uses from one to eight low-cost sensors to obtain multiple measurements of the ambient temperatures. The accuracy ranges of the developed monitoring systems with different numbers of sensors are statistically analysed. The results indicate that the discrepancy of the measurements decreases with the increase in the number of sensors, as the maximum standard deviation of 10 sensors (0.42) decreases to 0.32 and 0.27 for clusters of 20 and 30 sensors, respectively.Keywords
Funding Information
- Federación Española de Enfermedades Raras (BIA2013-47290-R, BIA2017-86811-C2-1-R, BIA2017-86811-C2-2-R)
- Federación Española de Enfermedades Raras (2018-COB-9092)
This publication has 54 references indexed in Scilit:
- Open Source Building Science Sensors (OSBSS): A low-cost Arduino-based platform for long-term indoor environmental data collectionBuilding and Environment, 2016
- Development of a Low-Cost Arduino-Based Sonde for Coastal ApplicationsSensors, 2016
- Laboratory Evaluation and Calibration of Three Low-Cost Particle Sensors for Particulate Matter MeasurementAerosol Science and Technology, 2015
- Field calibration of a cluster of low-cost available sensors for air quality monitoring. Part A: Ozone and nitrogen dioxideSensors and Actuators B: Chemical, 2015
- Numerical study of the depth and cross-sectional shape of tunnel under surface explosionTunnelling and Underground Space Technology, 2015
- The next generation of low-cost personal air quality sensors for quantitative exposure monitoringAtmospheric Measurement Techniques, 2014
- Experimental study of frost formation on a fin-and-tube heat exchanger by natural convectionInternational Journal of Refrigeration, 2014
- BIM-based framework for managing performance of subway stationsAutomation in Construction, 2014
- The use of electrochemical sensors for monitoring urban air quality in low-cost, high-density networksAtmospheric Environment, 2013
- An experimental study on the effect of the valve angle of counter-flow Ranque–Hilsch vortex tubes on thermal energy separationExperimental Thermal and Fluid Science, 2010