Finite element analysis of the wear fatigue resistance of gradient structure layers with different yield strength distributions
Authors:
Open Access
- 1 December 2018
- journal article
- conference paper
- Published by AIP Publishing in AIP Advances
- Vol. 8 (12) , 125120
Abstract
Finite element analysis (FEA) was performed to study the wear fatigue resistance of gradient structures (GSs) with different types of yield strength distributions under rolling-sliding contact. We found that the GS layer can reduce the plastic strain and surface deformation of the rail, which transfers a portion of the stress from the base layer to the gradient layer and thus enhances the wear fatigue resistance of the rail. The GS layer with a convex-shaped yield strength curve can most effectively reduce wear fatigue, followed by the GS layer with a linear-shaped yield strength curve, the GS layer with an inverse logistic-shaped yield strength curve, and the GS layer with a concave-shaped yield strength curve. The phenomenon of shakedown is also visible under repeated loading, and the GS rails step into stabilized states more easily than the original rail. The results show that the wear resistance of GSs can be improved by adjusting the yield strength curve through material processing methods or surface treatment methods, which can be used as a guideline for the wear fatigue-resistant design of heavy haul rail surfaces and other material processing methods and surface treatment methods.Keywords
Funding Information
- National Natural Science Foundation of China (51308474)
This publication has 27 references indexed in Scilit:
- Mechanical properties and optimal grain size distribution profile of gradient grained nickelActa Materialia, 2018
- Grain size gradient and length scale effect on mechanical behaviors of surface nanocrystalline metalsMaterials Science and Engineering: A, 2018
- Optimal stress and deformation partition in gradient materials for better strength and tensile ductility: A numerical investigationScientific Reports, 2017
- Fatigue crack growth behavior in gradient microstructure of hardened surface layer for an axle steelMaterials Science and Engineering: A, 2017
- A review on the strain rate dependency of the dynamic viscoplastic response of FCC metalsProgress in Materials Science, 2017
- Back stress strengthening and strain hardening in gradient structureMaterials Research Letters, 2016
- Synergetic Strengthening by Gradient StructureMaterials Research Letters, 2014
- Plastic behavior of fcc metals over a wide range of strain: Macroscopic and microscopic descriptions and their relationshipActa Materialia, 2011
- The main factor influencing the tensile properties of surface nano-crystallized graded materialsMaterials Science and Engineering: A, 2010
- Mechanical properties of nanocrystalline materialsProgress in Materials Science, 2006