Processing polyamides with superheated water
- 2 March 2018
- journal article
- research article
- Published by Wiley in Journal of Polymer Science Part B: Polymer Physics
- Vol. 56 (10) , 803-813
Abstract
Superheated water (shH2O) is investigated as a process aid in conventional aliphatic polyamide (PA) systems. The polymers investigated include PA 6 (PA6), PA 6,6 (PA66), PA 6,12 (PA612), and PA 12 (PA12). It is shown that the PA melting and crystallization temperatures are significantly reduced when exposed to shH2O. For example, the melting temperature of PA6 is depressed from 206 to 153 °C in the presence of shH2O. A relationship between amide group density and thermal transition temperature reduction is observed. Processing these materials in shH2O has led to a variety of materials ranging from low‐density foams to higher density locally anisotropic foamed morphologies. In situ observations of PAs melting in the presence of shH2O are performed using a specially designed reactor. Results from these experiments are used to estimate the diffusion coefficient of shH2O in PA6. Finally, low‐temperature extrusion is performed with PA6 and shH2O at temperatures as low as 180 °C and mixture viscosity is estimated. A 20‐fold depression in the melt viscosity of PA6 is observed at 240 °C with shH2O. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018, 56, 803–813Keywords
This publication has 17 references indexed in Scilit:
- Dissolution and Crystallization of Polyamides in Superheated Water and Concentrated Ionic SolutionsMacromolecules, 2013
- Processing of Polyamides in the Presence of Water via Hydrophobic Hydration and Ionic InteractionsMacromolecules, 2012
- Role of Superheated Water in the Dissolution and Perturbation of Hydrogen Bonding in the Crystalline Lattice of Polyamide 4,6Langmuir, 2008
- Water‐assisted melt compounding of nylon‐6/pristine montmorillonite nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2005
- Dissolution of Hydrogen-Bonded Polymers in Water: A Study of Nylon-4,6Macromolecules, 2004
- Effects of Moisture Conditioning Methods on Mechanical Properties of Injection Molded Nylon 6Journal of Reinforced Plastics and Composites, 2004
- Nylon 6/Na–montmorillonite nanocomposites prepared by compounding Nylon 6 with Na–montmorillonite slurryPolymer, 2003
- A new drawing technique for nylon-6 by reversible plasticization with iodinePolymer, 1986
- Influence of absorbed moisture on fatigue crack propagation behaviour in polyamidesJournal of Materials Science, 1981
- Deformation of plasticized nylon 6 with ammonia by solid‐state extrusionJournal of Polymer Science Part C: Polymer Letters, 1979