Optimization of turning process parameters using Multi-objective Evolutionary algorithm
Authors:
- 1 July 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1089778X,p. 1-6
Abstract
Machining parameters optimization is very crucial in any machining process. This research focuses on Multi-objective Evolutionary Algorithm based optimization technique, to determine optimal cutting parameters (cutting speed, feed, and depth of cut) in turning operation. Two conflicting objectives (operation time and tool life) with three constraints, which depends on the turning parameters, are optimized using Genetic algorithm (GAs). The Pareto-optimal front of the bi-objective problem is obtained using Non-dominated Sorting Genetic Algorithm (NSGA-II). The extreme and intermediate points of Pareto optimal front is verified using Real coded Genetic Algorithm (RGA) as well as ε-constraint method. The performance of NSGA-II is found to be more effective and efficient as compared to micro-GA. Innovization study carried out to correlate cutting parameters with the aforementioned objective functions. The effect of cutting speed is found more as compared to feed rate and depth of cut.Keywords
This publication has 14 references indexed in Scilit:
- Innovization2006
- Genetic algorithm-based multi-objective optimization of cutting parameters in turning processesEngineering Applications of Artificial Intelligence, 2006
- Optimization of machining techniques — A retrospective and literature reviewSādhanā, 2005
- Optimization of cutting conditions during cutting by using neural networksRobotics and Computer-Integrated Manufacturing, 2003
- Optimization of cutting process by GA approachRobotics and Computer-Integrated Manufacturing, 2003
- Modeling of tool wear by diffusion in metal cuttingWear, 2002
- Cutting-parameter selection for maximizing production rate or minimizing production cost in multistage turning operationsJournal of Materials Processing Technology, 2000
- Multiobjective Evolutionary Algorithms: Analyzing the State-of-the-ArtEvolutionary Computation, 2000
- Autonomous cutting parameter regulation using adaptive modeling and genetic algorithmsPrecision Engineering, 1998
- Optimization of cutting conditions for multi-pass turning operations using sequential quadratic programmingJournal of Materials Processing Technology, 1991