ESD Detection Circuit and Associated Metal Fuse Investigations in CMOS Processes
Authors:
- 6 January 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 14 (1) , 146-153
Abstract
A circuit to detect and record the occurrence of an electrostatic discharge (ESD) event on a powered or unpowered integrated-circuit (IC) chip is presented. The ESD detection circuit uses metal fuses for memory and has been experimentally verified in a commercial CMOS process to operate with 500 V or higher human body model (HBM) discharges. Experimental studies of metal fuses are also presented and provide information on short-duration metal interconnect failure limits in addition to the ESD event-detection goal. It is found that thin aluminum traces in an IC (e.g., 0.25-1-μm-width metal-1) may withstand from 50 to > 100 mA for periods exceeding several seconds or minutes, values in excess of 100 times the typically used long-term reliability electromigration limit of 1 mA/μm. For fuses used in the detection circuit, reliable fuse blowing is achieved at HBM ESD currents as low as 0.3 A using either transmission-line-pulse or full-voltage discharges (100-pF capacitance at 500 V discharged through 1500-Ω series resistance).Keywords
This publication has 9 references indexed in Scilit:
- Two ESD Detection Circuits for 3$\times$ VDD-Tolerant I/O Buffer in Low-Voltage CMOS Processes With Low Leakage CurrentsIEEE Transactions on Device and Materials Reliability, 2012
- On-Chip ESD detection circuit for system-level ESD protection design2010
- A 4 kb Metal-Fuse OTP-ROM Macro Featuring a 2 V Programmable 1.37 $\mu$m$^{2}$1T1R Bit Cell in 32 nm High-k Metal-Gate CMOSIEEE Journal of Solid-State Circuits, 2010
- ESD protection structure issues and design for custom integrated circuits2003
- A method for determining a transmission line pulse shape that produces equivalent results to human body model testing methods2002
- A new model for aluminum interconnect fusing caused by ESD2002
- Electrostatic discharge in semiconductor devices: an overviewProceedings of the IEEE, 1998
- Electromigration-Induced Failures in VLSI Interconnects1982
- The Action of Continuous and Alternating Currents on Fuse MetalsTransactions of the American Institute of Electrical Engineers, 1893