Numerical Approach for Improving the Conversion Characteristics of Exhaust Catalysts Under Warming-Up Condition
Authors:
- 1 October 1996
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Transient temperature and concentration distribution inside a catalytic converter during warm-up have been analyzed by experiments and numerical simulation. There is great maldistribution of species concentrations inside a converter during warm-up. Carbon monoxide (CO) and hydrocarbons (HC) have high concentrations in the exhaust gas passing through outer region cells because they are not converted due to low wall temperature. The effects of the noble metal loading pattern on conversion characteristics during warm-up have been investigated by numerical simulation. The effects of high-loading on improving conversion characteristics are saturated with the loading quantity of six times that of the base-loading. High-loading of the noble metal only on the frontal region (20 or 30mm. from the front face) has almost the same warming-up conversion performance as the uniform high-loading. Finally, a new loading pattern that improves conversion characteristics is suggested based on the above results. The quantity of noble metal loaded was six times on the outer region of frontal part, the same on the inner region of frontal part and one-half on the rest as that of the base-loading. This catalytic converter has the same total amount of noble metal loading as the uniform base-loading and shows higher conversion efficiency during warm-up.Keywords
This publication has 10 references indexed in Scilit:
- A Multi-Dimensional Numerical Method for Predicting Warm-Up Characteristic of Automobile Catalytic Converter SystemsSAE International Journal of Advances and Current Practices in Mobility, 1995
- New Technology for Reducing the Power Consumption of Electrically Heated CatalystsSAE International Journal of Advances and Current Practices in Mobility, 1994
- Modeling Current Generation Catalytic Converters: Laboratory Experiments and Kinetic Parameter Optimization - Steady State KineticsSAE International Journal of Advances and Current Practices in Mobility, 1992
- Numerical Simulation and Experimental Verification of Conversion and Thermal Responses for a Pt/Rh Metal Monolithic ConverterSAE International Journal of Advances and Current Practices in Mobility, 1989
- A Three-Dimensional Model for the Analysis of Transient Thermal and Conversion Characteristics of Monolithic Catalytic ConvertersSAE International Journal of Advances and Current Practices in Mobility, 1988
- Reaction kinetics on a commercial three-way catalyst: the carbon monoxide-nitrogen monoxide-oxygen-water systemIndustrial & Engineering Chemistry Product Research and Development, 1985
- Transients of monolithic catalytic converters. Response to step changes in feedstream temperature as related to controlling automobile emissionsIndustrial & Engineering Chemistry Product Research and Development, 1982
- Heat and mass transfer in honeycomb catalysts—IIChemical Engineering Science, 1975
- Kinetic Study of Carbon Monoxide and Propylene Oxidation on Platinum CatalystsProduct R&D, 1973
- Mathematical Modeling of CO and HC Catalytic Converter SystemsSAE International Journal of Advances and Current Practices in Mobility, 1971