Printable Liquid Metal Microparticle Ink for Ultrastretchable Electronics
Authors:
- 27 October 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (45) , 50852-50859
Abstract
Liquid metal confined in the elastomer represents an ideal platform for stretchable electronics with ultimate deformability. To enable facile and scalable patterning of conductive features, bulk liquid metal is typically dispersed into fine particles to formulate printable inks. The presence of native oxide or organic ligands stabilizing these liquid metal particles unfortunately inhibits their direct coalescence to recover the metallic conductivity and liquid-state deformability. Here, we report a chemical sintering process that converts printed liquid metal microparticles into a highly deformable conductor. The process involves the removal of surface passivating oxide by a short exposure to acid fume and subsequent selective wetting of liquid metal microparticles onto copper nanoplates present in the ink formulation. The chemical reaction provides the basis for a facile and scalable procedure to print conductive features over a large area with exceptional conductivity (>104 S cm–1) and ultrahigh stretchability (∼1000% strain). Their practical suitability is demonstrated by the fabrication of an ultrastretchable ribbon cable and an epidermal heater.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (2018YFB1105400)
- Jiangsu Provincial Department of Science and Technology (BE2019002)
- National Natural Science Foundation of China (61704074)
This publication has 46 references indexed in Scilit:
- Enhancing the Performance of Stretchable Conductors for E‐Textiles by Controlled Ink PermeationAdvanced Materials, 2017
- Pursuing prosthetic electronic skinNature Materials, 2016
- Stretchable Heater Using Ligand-Exchanged Silver Nanowire Nanocomposite for Wearable Articular ThermotherapyACS Nano, 2015
- Stretchable silicon nanoribbon electronics for skin prosthesisNature Communications, 2014
- Silver Nanowire Percolation Network Soldered with Graphene Oxide at Room Temperature and Its Application for Fully Stretchable Polymer Light-Emitting DiodesACS Nano, 2014
- Materials and Optimized Designs for Human‐Machine Interfaces Via Epidermal ElectronicsAdvanced Materials, 2013
- Highly Conductive and Stretchable Silver Nanowire ConductorsAdvanced Materials, 2012
- Epidermal ElectronicsScience, 2011
- Intrinsically Stretchable Polymer Light‐Emitting Devices Using Carbon Nanotube‐Polymer Composite ElectrodesAdvanced Materials, 2011
- A Rubberlike Stretchable Active Matrix Using Elastic ConductorsScience, 2008