Abstract
Thin films of BaTiO3 were deposited on p-Si substrates by rf magnetron sputtering in order to investigate their suitability for use in ac thin film electroluminescent (ACTFEL) devices and dynamic RAM (DRAM) applications. Post-growth annealing at 700°C and the subseauent deposition of Al contacts resulted in the creation of Al/BaTiO3/p-Si metal-insulator-semiconductor devices. The electronic and structural properties of the films were examined by admittance spectroscopy, current-voltage and transient current measurements, and X-ray diffraction (XRD) characterization. Analysis of the XRD spectra showed the polycrystalline nature of the films but also the presence of an amorphous phase. The electrical measurements revealed a high dielectric constant, around 60, a charge storage capacity exceeding 3 μC cm−2 and a total charge trapped inside the oxide of around 50 nC cm−2 while the density of traps at the BaTiO3/p-Si interface was found to be as high as 1 × 1012 cm−2 eV−1. These results indicate that the films are suitable for both DRAM and ACTFEL applications.

This publication has 14 references indexed in Scilit: