Age-hardening behaviour, microstructure and corrosion resistance of the copper alloyed stainless steel 1.4542
Open Access
- 12 June 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 373 (1) , 012020
Abstract
The copper alloyed stainless steel 1.4542 (X5CrNiCuNb16-4) is used in different areas due to its good mechanical properties and corrosion resistance. Strength and corrosion resistance can be adjusted by the heat treatment, which is of importance for the application of this alloy. The mechanical properties (strength and hardness) are attributed to the dispersive precipitation of the copper rich –Phase. The additional precipitation of chromium carbides can reduce the corrosion resistance. Different ageing states were produced to investigate the precipitation behaviour with various methods. Furthermore, the influence of cold-rolling on the precipitation behaviour was studied in comparison to a solution annealed state without deformation. The microstructure was studied by SEM and the variations of hardness and magnetic proportion were characterised. The electrochemical potentiodynamic reactivation (EPR) was used to determine the corrosion resistance and detect chromium depletion in all heat-treated states. The results show that a work hardening accelerates the precipitation rate, while ageing at 600 °C reduces the corrosion resistance due to chromium depletion.Keywords
This publication has 9 references indexed in Scilit:
- Einfluss der Wärmebehandlung auf die Korrosionsbeständigkeit von Schneidwaren*HTM Journal of Heat Treatment and Materials, 2017
- Influence of solution annealing temperature and cooling medium on microstructure, hardness and corrosion resistance of martensitic stainless steel X46Cr13Materials and Corrosion, 2015
- Microstructure of Welded Joints of X5CrNiCuNb16-4 (17-4 PH) Martensitic Stainlees Steel After Heat TreatmentArchives of Metallurgy and Materials, 2014
- The factor time at the formation and development of the passive layer in the atmosphereMaterials and Corrosion, 2007
- Einfluss der Schleifbehandlung auf das Korrosionsverhalten von Chrom‐Nickel‐StählenMaterials and Corrosion, 2004
- The effect of copper on passivity and corrosion behaviour of ferritic and ferritic–austenitic stainless steelsMaterials Science and Engineering: A, 2000
- Korrosionsverhalten nichtrostender Vergütungsstähle mit rund 13% ChromMaterials and Corrosion, 1967
- Dislocation pipe diffusionActa Metallurgica, 1964
- Zusammenhang zwischen Anlaßbehandlung und Korrosionsverhalten von härtbaren nichtrostenden ChromstählenArchiv für das Eisenhüttenwesen, 1961