Combining Satellite InSAR, Slope Units and Finite Element Modeling for Stability Analysis in Mining Waste Disposal Areas
Authors:
- Juan López-ViniellesJLJuan López-Vinielles
- José A. Fernández-MerodoJFJosé A. Fernández-Merodo
- Pablo EzquerroPEPablo Ezquerro
- Juan C. García-DavalilloJGJuan C. García-Davalillo
- Roberto SarroRoberto Sarro
- Cristina Reyes-CarmonaCRCristina Reyes-Carmona
- Anna BarraABAnna Barra
- José A. NavarroJNJosé A. Navarro
- Vrinda KrishnakumarVKVrinda Krishnakumar
- Massimiliano AlvioliMassimiliano Alvioli
- Gerardo HerreraGerardo Herrera
Open Access
- 20 May 2021
- journal article
- research article
- Published by MDPI AG in Remote Sensing
- Vol. 13 (10) , 2008
Abstract
Slope failures pose a substantial threat to mining activity due to their destructive potential and high probability of occurrence on steep slopes close to limit equilibrium conditions, which are often found both in open pits and in waste and tailing disposal facilities. The development of slope monitoring and modeling programs usually entails the exploitation of in situ and remote sensing data, together with the application of numerical modeling, and it plays an important role in the definition of prevention and mitigation measures aimed at minimizing the impact of slope failures in mining areas. In this paper, a new methodology is presented; one that combines satellite radar interferometry and 2D finite element modeling for slope stability analysis at a regional scale, and applied within slope unit polygons. Although the literature includes many studies applying radar interferometry and modeling for slope stability analysis, the addition of slope units as input data for radar interferometry and modeling purposes has, to our knowledge, not previously been reported. A former mining area in southeast Spain was studied, and the method proved useful for detecting and characterizing a large number of unstable slopes. Out of the 1959 slope units used for the spatial analysis of the radar interferometry data, 43 were unstable, with varying values of safety factor and landslide size. Out of the 43 active slope units, 21 exhibited line of sight velocities greater than the maximum error obtained through validation analysis (2.5 cm/year). Finally, this work discusses the possibility of using the results of the proposed approach to devise a proxy for landslide hazard. The proposed methodology can help to provide non-expert final users with intelligible, clear, and easily comparable information to analyze slope instabilities in different settings, and not limited to mining areas.Keywords
All Related Versions
Funding Information
- Comunidad de Madrid (IND2017/AMB-7789)
This publication has 48 references indexed in Scilit:
- Integration of ground-based radar and satellite InSAR data for the analysis of an unexpected slope failure in an open-pit mineEngineering Geology, 2018
- An integrated remote sensing-GIS approach for the analysis of an open pit in the Carrara marble district, Italy: Slope stability assessment through kinematic and numerical methodsComputers and Geotechnics, 2015
- Integration of UAV-Based Photogrammetry and Terrestrial Laser Scanning for the Three-Dimensional Mapping and Monitoring of Open-Pit Mine AreasRemote Sensing, 2015
- Development of an early-warning time-of-failure analysis methodology for open-pit mine slopes utilizing ground-based slope stability radar monitoring dataCanadian Geotechnical Journal, 2015
- Automatic prediction of time to failure of open pit mine slopes based on radar monitoring and inverse velocity methodInternational Journal of Mining Science and Technology, 2014
- GPS/terrestrial 3D laser scanner combined monitoring technology for coal mining subsidence: a case study of a coal mining area in Hebei, ChinaNatural Hazards, 2013
- Review of surface mine slope monitoring techniquesJournal of Mining Science, 2010
- Mining subsidence and its effect on the environment: some differing examplesEnvironmental Geology, 2000
- TDR monitoring as a component of subsidence risk assessment over abandoned minesInternational Journal of Rock Mechanics and Mining Sciences, 1997
- Underground Excavations in Rock1980