Operating Constraints Management of a Surface-Mounted PM Synchronous Machine by Means of an FPGA-Based Model Predictive Control Algorithm
- 2 May 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 10 (1) , 243-255
Abstract
A model predictive control algorithm (MPC) suitable for Surface-Mounted Permanent Magnet Synchronous Machines (SPMs) is presented in this paper. It is based upon an accurate discrete-time model of the drive, accounting for both voltage saturation and current limitation constraints. It aims to properly manage these constraints in order to guarantee a good exploitation of both transient and steady state SPM performances, especially over flux-weakening operation. The effectiveness of the proposed MPC is first validated by a simulation study, in which the sensitivity of the proposed MPC against un-compensated inverter un-idealities and parameter uncertainties is properly highlighted and discussed, as well as the effects of sudden load torque variations. Then, an experimental study is performed on a radial-flux SPM driven by a Field Programmable Gate Arrays (FPGA) control board. The performances achievable by the proposed MPC are compared with those obtained by a conventional PI-based control system in order to highlight the improvements, especially regarding transient and flux-weakening operation.Keywords
This publication has 34 references indexed in Scilit:
- Direct-Flux Vector Control of IPM Motor Drives in the Maximum Torque Per Voltage Speed RangeIEEE Transactions on Industrial Electronics, 2011
- Deadbeat-direct torque and flux control for interior PM synchronous motors operating at voltage and current limits2011
- Comparative study of PMSM Drive systems based on current control and direct torque control in flux-weakening control region2011
- FPGAs in Industrial Control ApplicationsIEEE Transactions on Industrial Informatics, 2011
- On sampled-data models for model predictive control2010
- Field weakening in PMSM model based predictive control2010
- Feedforward Flux-Weakening Control of Surface-Mounted Permanent-Magnet Synchronous Motors Accounting for Resistive Voltage DropIEEE Transactions on Industrial Electronics, 2009
- Predictive Torque Control of Induction Machines Based on State-Space ModelsIEEE Transactions on Industrial Electronics, 2009
- Combined speed and current Model Predictive Control with inherent field-weakening features for PMSM Drives2008
- Perfect Tracking Control of Servo Motor Based on Precise Model with PWM Hold and Current Loop2007