Interlaboratory studies of highly permeable thin‐film composite polyamide nanofiltration membrane
- 27 May 2011
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 23 (5) , 884-893
Abstract
The aim of this paper is to survey interlaboratory studies of performance data to produce highly permeable thin‐film composite (TFC) polyamide nanofiltration (NF) membrane in the form of flat sheet at bench scale. TFC polyamide NF membranes were fabricated via interfacial polymerization of 1,3‐phenylenediamine and trimesoyl chloride on porous polyethersulfone (PES) membrane. The NF membranes were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), and cross‐flow filtration. The AFM and SEM analyses indicated that a rough and dense film was formed on the PES support membrane. The permeability and NaCl rejection of the NF membrane prepared at the presence of camphor sulfonic acid as pH regulator and triethylamine as accelerator in the aqueous solution were 21 l m−2 h−1 and 70%, respectively. In order to estimate the repeatability and reproducibility standard deviations, the development of an interlaboratory study was conducted by measurements of permeation flux and salt rejection of the synthesized membranes. Repeatability standard deviation of the permeation flux data for the membrane based on optimum formulation was 1.99, and reproducibility standard deviation was 3.55. Also based on this trend, repeatability standard deviation of the salt rejection data was 1.57, and reproducibility standard deviation was 4.11. The American Society for Testing and Materials standard E691‐05 was used for data validation of the repeatability and reproducibility standard deviations and consistency statistics. Copyright © 2011 John Wiley & Sons, Ltd.Keywords
This publication has 19 references indexed in Scilit:
- Preparation and characterization of asymmetric polyethersulfone and thin-film composite polyamide nanofiltration membranes for water softeningApplied Surface Science, 2010
- Performance evaluation of thin film composite polyamide nanofiltration membrane with variation in monomer typeJournal of Membrane Science, 2009
- Influence of the polyacyl chloride structure on the reverse osmosis performance, surface properties and chlorine stability of the thin-film composite polyamide membranesJournal of Membrane Science, 2009
- Study on a novel polyamide-urea reverse osmosis composite membrane (ICIC–MPD)I. Preparation and characterization of ICIC–MPD membraneJournal of Membrane Science, 2006
- Interfacially polymerized hydrophilic microporous thin film composite membranes on porous polypropylene hollow fibers and flat filmsJournal of Membrane Science, 2006
- Influence of the diamine structure on the nanofiltration performance, surface morphology and surface charge of the composite polyamide membranesJournal of Membrane Science, 2006
- Effect of mixed crosslinking agents on performance of thin-film-composite membranesDesalination, 2006
- Composite Nanofiltration Polyamide Membrane: A Study on the Diamine Ratio and Its Performance EvaluationIndustrial & Engineering Chemistry Research, 2004
- Preparation and characterization of NF composite membraneJournal of Membrane Science, 2002
- Factors affecting the interfacial polymerization of polyamide active layers for the formation of polyamide composite membranesJournal of Applied Polymer Science, 2002