The effects of wheelset driving system suspension parameters on the re-adhesion performance of locomotives
Authors:
- 8 November 2015
- journal article
- research article
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 53 (12) , 1935-1951
Abstract
In this study, in order to examine the effects of a wheelset driving system suspension parameters on the re-adhesion performance of locomotives, the stick–slip vibration was analysed according to theoretical and simulation analysis. The decrease of the slip rate vibration amplitude improved the stability of the stick–slip vibration and the re-adhesion performance of locomotives. Increasing the longitudinal guide stiffness of the wheelset and the motor suspension stiffness were proposed as effective measures to improve the re-adhesion performance of locomotives. These results showed that the dynamic slip rate was inversely proportional to the series result of the square root of the longitudinal guide and motor suspension stiffness. The larger the motor suspension stiffness was, the smaller the required longitudinal guidance stiffness was at the same re-adhesion time once the wheel slip occurred, and vice versa. The simulation results proved that the re-adhesion time of the locomotive was approximately proportional to amplitude of the dynamic slip rate. When the stick–slip vibration occurred, the rotary and the longitudinal vibrations of the wheelset were coupled, which was confirmed by train's field tests.Keywords
Funding Information
- National Natural Science Foundation of China (51205324, 51375403)
- Fundamental Research Funds for the Central Universities (2682014CX040)
- Independent Research and Development Projects of a Key Laboratory (2015TPL_T10)
This publication has 9 references indexed in Scilit:
- An analysis of resonance effects in locomotive drive systems experiencing wheel/rail saturation adhesionProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2012
- IDENTIFICATION OF TRANSIENT PHENOMENA OCCURRING AT THE INITIATION AND TERMINATION OF WHEELSET SLIDINGTransport, 2012
- THE MODERN WHEELSET DRIVE SYSTEM AND POSSIBILITIES OF MODELLING THE TORSION DYNAMICSTransport, 2008
- An experimental investigation of transient traction characteristics in rolling–sliding wheel/rail contacts under dry–wet conditionsWear, 2007
- Thermal stresses and shakedown in wheel/rail contactArchive of Applied Mechanics, 2003
- Wheel/rail adhesion and analysis by using full scale roller rigWear, 2002
- A nonoverlapping DDM for the nonstationary Navier‐Stokes problemZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2001
- A Fast Wheel-Rail Forces Calculation Computer CodeVehicle System Dynamics, 1999
- Self-excited vibration during slippage of parallel Cardan drives for electric railcars.JSME International Journal, 1987