Internal Model Control of a Domestic Microwave for Carbon Composite Curing
Authors:
Open Access
- 11 May 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 65 (11) , 4335-4346
Abstract
This paper outlines the conversion of a domestic microwave oven for use in composite curing applications. It compares several strategies for temperature control. The converted oven has vacuum ports, connectors, and fiber optic thermocouple sensors. Experimental data are provided for each control strategy based on a 200 mm × 200 mm eight-ply prepreg laminate. The degree of cure is established for the test samples by thermal analysis techniques. Multiphysics simulation is used to model the electromagnetic and heating effects in the system, and a common and inexpensive method of approximating the available microwave power is used. The low cost of the microwave components and the ease of conversion are desirable characteristics in this application.Keywords
Funding Information
- EPSRC via an Impact Acceleration Account
This publication has 31 references indexed in Scilit:
- Analysis and optimization of temperature distribution in carbon fiber reinforced composite materials during microwave curing processJournal of Materials Processing Technology, 2014
- Electrical resistivity measurement of carbon-fiber-reinforced ceramic matrix composite under thermo-mechanical loadComposites Science and Technology, 2013
- On the electrical resistance of carbon fiber polymer matrix compositesComposites Part A: Applied Science and Manufacturing, 2010
- Cure studies on bifunctional epoxy matrices using a domestic microwave ovenPolymer Testing, 2008
- Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heatingComposites Science and Technology, 2008
- Dielectric properties of an epoxy‐amine system at a high microwave frequencyPolymer Engineering & Science, 2005
- Effect of mode-stirrer configurations on dielectric heating performance in multimode microwave applicatorsIEEE Transactions on Microwave Theory and Techniques, 2005
- Development of a microwave calorimeter for simultaneous thermal analysis, infrared spectroscopy and dielectric measurementsMeasurement Science and Technology, 2004
- Flexural and interlaminar shear strength properties of carbon fibre/epoxy composites cured thermally and with microwave radiationComposites Part A: Applied Science and Manufacturing, 2002
- A modified Smith predictor for controlling a process with an integrator and long dead-timeIEEE Transactions on Automatic Control, 1996