Printing low-melting-point alloy ink to directly make a solidified circuit or functional device with a heating pen
Authors:
Open Access
- 8 December 2014
- journal article
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 470 (2172) , 20140609
Abstract
A new method to directly print out a solidified electronic circuit through low-melting-point metal ink is proposed. A functional pen with heating capability was fabricated. Several typical thermal properties of the alloy ink Bi 35 In 48.6 Sn 16 Zn 0.4 were measured and evaluated. Owing to the specifically selected melting point of the ink, which is slightly higher than room temperature, various electronic devices, graphics or circuits can be manufactured in a short period of time and then rapidly solidified by cooling in the surrounding air. The liquid–solid phase change mechanism of the written lines was experimentally characterized using a scanning electron microscope. In order to determine the matching substrate, wettability between the metal ink Bi 35 In 48.6 Sn 16 Zn 0.4 and several materials, including mica plate and silicone rubber, was investigated. The resistance–temperature curve of a printed resistor indicated its potential as a temperature control switch. Furthermore, the measured reflection coefficient of a printed double-diamond antenna accords well with the simulated result. With unique merits such as no pollution, no requirement for encapsulation and easy recycling, the present printing approach is an important supplement to current printed electronics and has enormous practical value in the future.Keywords
This publication has 35 references indexed in Scilit:
- Properties and Printability of Inkjet and Screen-Printed Silver Patterns for RFID AntennasJournal of Electronic Materials, 2013
- All-solution processed polymer light-emitting diode displaysNature Communications, 2013
- Directly Drawn Organic Transistors by Capillary Pen: A New Facile Patterning Method using Capillary Action for Soluble Organic MaterialsAdvanced Materials, 2013
- Toward inkjet printing of small molecule organic light emitting diodesThin Solid Films, 2013
- A Flexible Proximity Sensor Fully Fabricated by Inkjet PrintingSensors, 2010
- Foldable Printed Circuit Boards on Paper SubstratesAdvanced Functional Materials, 2009
- Reversibly Deformable and Mechanically Tunable Fluidic AntennasAdvanced Functional Materials, 2009
- High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene BlendsAdvanced Materials, 2007
- High-Resolution Inkjet Printing of All-Polymer Transistor CircuitsScience, 2000
- An electrophoretic ink for all-printed reflective electronic displaysNature, 1998