A comparison of flow development in high density gas‐solids circulating fluidized bed downer and riser reactors
Authors:
- 5 January 2015
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 61 (4) , 1172-1183
Abstract
Comparison of flow development in high density downer and riser reactors is experimentally investigated using fluid catalytic cracking particles with very high solids circulation rate up to 700 kg/m2s for the first time. Results show that both axial and radial flow structures are more uniform in downers compared to riser reactors even at very high density conditions, although the solids distribution becomes less uniform in the high density downer. Solids acceleration is much faster in the downer compared to the riser reactor indicating a shorter length of flow development and residence time, which is beneficial to the chemical reactions requiring short contact time and high product selectivity. Slip velocity in risers and downers is also first compared at high density conditions. The slip velocity in the downer is much smaller than in the riser for the same solids holdup indicating less particle aggregation and better gas‐solids contacting in the downer reactors. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1172–1183, 2015Keywords
This publication has 43 references indexed in Scilit:
- Gas‐solids flow structures in a novel circulating‐turbulent fluidized bedAIChE Journal, 2008
- Reflections on turbulent fluidization and dense suspension upflowPowder Technology, 2000
- Introduction to Circulating Fluidized Beds1997
- Effect of flow direction on axial solid dispersion in gas—solids cocurrent upflow and downflow systemsThe Chemical Engineering Journal and the Biochemical Engineering Journal, 1996
- Summary paper on fluidization and transport phenomenaPowder Technology, 1996
- Cocurrent downflow circulating fluidized bed (downer) reactors — A state of the art reviewThe Canadian Journal of Chemical Engineering, 1995
- Effect of measurement method on the velocities used to demarcate the onset of turbulent fluidizationThe Chemical Engineering Journal and the Biochemical Engineering Journal, 1995
- Mapping solid concentration in a circulating fluid bed using gammametryPowder Technology, 1991
- Further studies of the regimes of fluidizationPowder Technology, 1979
- Characteristics of Fluidized ParticlesIndustrial & Engineering Chemistry, 1949