Optimization of fins arrangements for the square light emitting diode (LED) cooling through nanofluid-filled microchannel
Authors:
Open Access
- 15 June 2021
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-22
Abstract
In current paper, a finned micro-channel is designed for the cooling application in Light Emitting Diode (LED), numerically using Galerkin weighted residual Finite Element Method (GFEM). Selected materials for LED-chip is GaN, Die from Si, Die-attach is made by Au-20Sn, substrate is copper and heat sink material is considered to be Al. To make a convection heat transfer for cooling process, Al2O3-water nanofluid is used as the cooling fluid flow through the micro-channel and tried to maximize the heat transfer efficiency by optimized geometry. For this aim, there geometry variables from the microchannel were selected and minimum possible geometry cases (11 cases) were proposed by Central composite design (CCD) and variables were optimized by the Response Surface Method (RSM). As a main result, parameter B, i.e. fin length had the most effect on the Nusselt number and Al2O3 nanoparticles with φ = 0.05 stated greatest heat transfer value. Also, different designs of fins arrangements, caused up to 6.5% increase in the nanofluid temperature which enhanced the LED cooling process.Keywords
All Related Versions
This publication has 41 references indexed in Scilit:
- A three-dimensional thermal analysis and optimization of square light edding diode subcomponentsInternational Communications in Heat and Mass Transfer, 2021
- Alternate PCM with air cavities in LED heat sink for transient thermal managementInternational Journal of Numerical Methods for Heat & Fluid Flow, 2019
- Thermal study of the atomic ratio effect on a cylindrical and an ellipsoidal shaped HgTlI discharge lampsThe European Physical Journal D, 2019
- Large current efficiency enhancement in the CsPbBr3 perovskite light-emitting diodes assisted by an ultrathin buffer layerJournal of Luminescence, 2019
- Heat transfer enhancement of circular and square LED geometryInternational Journal of Numerical Methods for Heat & Fluid Flow, 2018
- Full coverage all-inorganic cesium lead halide perovskite film for high-efficiency light-emitting diodes assisted by 1,3,5-tri(m-pyrid-3-yl-phenyl)benzeneOrganic Electronics, 2017
- A three-dimensional thermal study of a mercury discharge lamp with double envelope for different orientationsJournal of Plasma Physics, 2014
- Application of a three-dimensional model for a study of the energy transfer of a high-pressure mercury horizontal lampPhysics of Plasmas, 2012
- Development of a thermal resistance model for chip-on-board packaging of high power LED arraysMicroelectronics Reliability, 2012
- Contrast between the vertical and horizontal mercury discharge lampsPhysics of Plasmas, 2011