8-Bit, 2 MSPS, 1.8 V Pipelined Analog-to-Digital Converter with Digital Error Correction Circuit for Data Communication
Authors:
- 1 August 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
This paper presents the design of 8bit pipelined analog-to-digital converter (ADC) with digital error correction circuit operates at the sampling frequency of 2 MHz. This work is implemented by 1.5-bit slice for the first 7-stages and followed by a simple flash ADC. Each 1.5bit slice comprises a 2-bit comparator, a logic circuit and a residue amplifier. The residue amplifier consists of an operational amplifier with a gain-boosting technique to boost the overall open-loop DC gain. The technique incorporates isolation of the input differential pair by a pair of NMOS devices and a pair of OTA at the cascode stage of the core amplifier. Each stage provides 2-bit digital code that is aligned and added by the digital error correction circuit after all the operations complete. The conversion for the differential analog input is ranging from ±900 mV. Post layout simulation results show that, the ADC is able to work functionally at 8-bit resolution with differential non-linearity (DNL) and integral non-linearity (INL) errors, ±0.5 and ±2 LSB, respectively. The ADC consumes 32 mW for the conversion. The dimension of the layout is 1800 μm × 800 μm and is fabricated using Silterra 0.18 μm CMOS process technology.Keywords
This publication has 4 references indexed in Scilit:
- Application of mobile Bluetooth based on human physiological parameters wireless sensor2016
- Various architectures of analog to digital converter2015
- A 93.36 dB, 161 MHz gain improved CMOS OTA for a 16 bit pipeline analog to digital converter2010
- A pipelined 5-Msample/s 9-bit analog-to-digital converterIEEE Journal of Solid-State Circuits, 1987