Potential of an Al-Ti-MgAl2O4 Master Alloy and Ultrasonic Cavitation in the Grain Refinement of a Cast Aluminum Alloy
Open Access
- 24 October 2016
- journal article
- research article
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 48 (1) , 208-219
Abstract
A new grain refining master alloy containing MgAl2O4 and Ti was synthesized by in situ reaction of TiO2 particles in an Al-Mg melt. MgAl2O4 particles formed were distributed in the melt by ultrasonic cavitation processing. The obtained master alloy showed considerable (50 pct) grain refining ability in a commercial A357-type Al-Si alloy. Ultrasonication contributed further to 25 pct in the grain refinement. In comparison with a commercial Al-5 pct Ti-1 pct B master alloy, the efficiency of the new master alloy is less at a lower addition rate. Nevertheless, both master alloys performed similarly at higher additions. The strength and ductility of the inoculated and ultrasonicated alloy showed at least a 10 pct and a 50 pct increase, respectively, as compared with non-grain-refined alloy and a similar mechanical performance in comparison with the alloy inoculated with Al-5 pct Ti-1 pct B master alloy.Keywords
This publication has 38 references indexed in Scilit:
- Fabrication of aluminum matrix composites with enhanced mechanical properties reinforced by in situ generated MgAl2O4 whiskersComposites Part A: Applied Science and Manufacturing, 2012
- Ultrasonic assisted fabrication of particle reinforced bonds joining aluminum metal matrix compositesMaterials & Design (1980-2015), 2011
- TiAlSi intermetallic formation and its impact on the casting processing in Al–Si alloysJournal of Materials Processing Technology, 2010
- Grain refining of conventional and semi-solid A356 Al–Si alloyJournal of Materials Processing Technology, 2006
- The thermal stability of TiC particles in an Al7wt.%Si alloyMaterials Science and Engineering: A, 2003
- Grain refinement of alloys by inoculation of meltsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2003
- APPLICATIONS OF ULTRASOUND TO MATERIALS CHEMISTRYAnnual Review of Materials Science, 1999
- Mechanism of grain refinement in aluminiumActa Metallurgica et Materialia, 1995
- Heterogeneously nucleated α-Al in amorphous aluminium alloysMaterials Science and Engineering: A, 1994
- Preparation of aluminium-alumina in-situ particle composite by addition of titania to aluminium meltScripta Metallurgica et Materialia, 1993