Biomorphous porous hydroxyapatite-ceramics from rattan (Calamus Rotang)

Authors:

Abstract
The three-dimensional, highly oriented pore channel anatomy of native rattan (Calamus rotang) was used as a template to fabricate biomorphous hydroxyapatite (Ca5(PO4)3OH) ceramics designed for bone regeneration scaffolds. A low viscous hydroxyapatite-sol was prepared from triethyl phosphite and calcium nitrate tetrahydrate and repeatedly vacuum infiltrated into the native template. The template was subsequently pyrolysed at 800°C to form a biocarbon replica of the native tissue. Heat treatment at 1,300°C in air atmosphere caused oxidation of the carbon skeleton and sintering of the hydroxyapatite. SEM analysis confirmed detailed replication of rattan anatomy. Porosity of the samples measured by mercury porosimetry showed a multimodal pore size distribution in the range of 300 nm to 300 μm. Phase composition was determined by XRD and FT-IR revealing hydroxyapatite as the dominant phase with minimum fractions of CaO and Ca3(PO4)2. The biomorphous scaffolds with a total porosity of 70–80% obtained a compressive strength of 3–5 MPa in axial direction and 1–2 MPa in radial direction of the pore channel orientation. Bending strength was determined in a coaxial double ring test resulting in a maximum bending strength of ~2 MPa.

This publication has 33 references indexed in Scilit: