Mechanistic study of nanoparticles-assisted xanthan gum polymer flooding for enhanced oil recovery: a comparative study
Authors:
Open Access
- 29 October 2021
- journal article
- research article
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 12 (1) , 207-213
Abstract
Recently, nanoparticle additives have been used to improve stability and hence efficiency of chemicals during enhanced oil recovery. Herein, a comparative analysis of the application of nanoparticle-stabilized xanthan gum for oil recovery applications was investigated. The nanoparticles used as additives are silicon oxide (SiO2), metallic aluminium oxide (Al2O3), and titanium oxide (TiO2). Rheological measurements were carried out to examine the shear viscosity of the polymeric nanofluids under a range of salinity typical of reservoir conditions. Interfacial tension (IFT) experiment was conducted using Kruss tensiometer. Oil displacement studies were carried out to examine the incremental recovery factor of the polymeric nanofluids. The polymeric nanofluids exhibited better rheological behaviour compared to bare xanthan gum (XG) polymer. At 0.5 wt.% nanoparticle concentration, 0.5 wt.% polymer concentration, shearing rate of 10 s−1, and 3 wt.% NaCl concentration, rheology result shows that the shear viscosity of SiO2-XG, Al2O3-XG, and TiO2-XG is 423 mPa.s, 299 mPa.s, and 293 mPa.s, respectively. Moreover, the polymeric nanofluids lowered the IFT of the oil/brine interface due to adsorption at the nanoparticles at the interface. Finally, oil displacement result confirms that the incremental oil recovery after water flooding by Al2O3-XG, TiO2-XG, and SiO2-XG is 28.4%, 27.6%, and 25.2%, respectively.Keywords
This publication has 25 references indexed in Scilit:
- Aquathermolysis of heavy oil using nano oxides of metalsJournal of Petroleum Science and Engineering, 2017
- Rheological Properties of Partially Hydrolyzed Polyacrylamide Seeded by NanoparticlesIndustrial & Engineering Chemistry Research, 2017
- In-situ heavy and extra-heavy oil recovery: A reviewFuel, 2016
- Heavy oil polymer flooding from laboratory core floods to pilot tests and field applications: Half-century studiesJournal of Petroleum Science and Engineering, 2016
- Studies on behavior of suspension of silica nanoparticle in aqueous polyacrylamide solution for application in enhanced oil recoveryPetroleum Science and Technology, 2016
- Viscosity Reduction of Heavy Oil Using Nanocatalyst in Aquathermolysis ReactionKONA Powder and Particle Journal, 2016
- Review on Polymer Flooding: Rheology, Adsorption, Stability, and Field Applications of Various Polymer SystemsPolymer Reviews, 2015
- Enhanced oil recovery performance and viscosity characteristics of polysaccharide xanthan gum solutionJournal of Industrial and Engineering Chemistry, 2015
- Review of ASP EOR (alkaline surfactant polymer enhanced oil recovery) technology in the petroleum industry: Prospects and challengesEnergy, 2014
- Rheological behavior of xanthan gum solution related to shear thinning fluid delivery for subsurface remediationJournal of Hazardous Materials, 2013